Smooth contour prevents lines from snagging on housing.
	Available in a variety of finishes
	Stainless Steel electrical contacts will not corrode>
	Includes 8-watt festoon bulb

For use on boats up to 65.6 ft. (20 meteres)

One-mile, 225° red/green light visibility with bi-color lens and one 7.5-watt lamp. 10" pole. In use by OEMs for over 15 years, there is a proven replacement market for this light. Constructed of die-cast ZAMAK with Perma-Plate® finish. Lens is polycarbonate.

Our popular all-round light with standard pole base package features a new lens style. Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"-long x 1-5/8"-wide x 1-3/8"-dia. Includes Zamak base and one 8-watt wedge-base lamp. Has three countersunk holes for #10 fasteners.

These 2-pin and 3 pin bases for pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.

This highly used base is constructed of die-cast ZAMAK with Perma-Plate® chrome finish. Swivel cover protects the socket when light is stowed away. Socket is keyed to prevent incorrect insertion of pole light. Provides a 2-pin socket and a 12° angle and installs on narrow gunwales or deck areas. Completely non-corrosive, features contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.Three countersunk holes for installation fasteners. Includes 7-1/2" hard wire leads for connection to 12 VDC power supply. Dimensions: 4" long x 1-5/8" wide. 1-3/8" diameter installation hole size

New design holds larger-diameter anti-glare pole lights. Resilient rubber clip holds standard 3/4"-diameter poles. Ideal for storing and protecting plug-in pole lights when mounted in engine wells or lockers. Installs with one #8 screw.

Clamp attachment for a variety of surface thicknesses

LED technology uses 66% less energy than comparable output incandescents. Molded one-piece body construction. Requires three "C" batteries (not included). Clamp-on attachment for a variety of surface thicknesses. These lights are not intended to meet Coast Guard regulations. Not for use on boats which can exceed speeds of 7 knots

LED technology uses 66% less energy than comparable output incandescents. Molded one-piece body construction. Requires three "C" batteries (not included). Clamp-on attachment for a variety of surface thicknesses. These lights are not intended to meet Coast Guard regulations. Not for use on boats which can exceed speeds of 7 knots

Features a krypton bulb that burns bright and lasts long. Constructed of rugged high-impact resin. Easy thumb switch operation.Clamp-on attachment for a variety of surface thicknesses. These lights are not intended to meet Coast Guard regulations. Not for use on boats which can exceed speeds of 7 knots.

Features a krypton bulb that burns bright and lasts long. Constructed of rugged high-impact resin. Easy thumb switch operation.Clamp-on attachment for a variety of surface thicknesses. These lights are not intended to meet Coast Guard regulations. Not for use on boats which can exceed speeds of 7 knots.

Clamp may be rotated for vertical or horizontal attachment

Clear lens. For attachment to inflatables and other boats where screws cannot be used.

New Features!

	4 cable openings, enlarged to .55" diameter
	Larger handles with rolled edges
	Instructions molded inside cover

Lead terminals with wing nuts and cadmium-plated bolts. Clamps are stamped with negative (-) or positive (+) sign.

See-thru tank makes fuel level visible from any angle. Tank includes vented cap, filtered pick-up tube, and gas line coupling for 1/4" NPT fittings. 21" L x 11-1/2" W x 9-1/2" H. Adapts to all outboard engines. Massachusetts Fire Marshal Approval Number PC-156. Meets both ABYC and CSA.

A complete package to start downrigger fishing. Ideal for the value-conscious fisherman. The Mini Rigger brings controlled-depth trolling capabilities even to small boats. It is designed to operate with one hand. Features easy-grip handle and a swivel head pulley to respond to line movements. Strong, lightweight reinforced polycarbonate. One full turn equals one foot of line. Adjustable disc-brake-drag slip-clutch locks in line depth and slips if weight snags. Kit includes 100' of stainless steel line, 4-pound cannonball weight, snap swivel, a side mount (5020), and line release.

A true 12-gallon tank–it holds 12 gallons of gas and 2 pints of oil
Fits most pontoon trays 13-3/4" H x 14-1/2" W x 20-3/4" L
Molded-in level markings measured in gallons and liters

Provides clean method of emptying oil from inboards and inboard/outboard engines. Fits dipstick tube of engines. Also fits built-in screw fitting on recent inboard/outboard models. Solid brass pump with removable, pliable polyethylene tubing.

Note: Do not use full flow from hose.

Fits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks and releases the jack from one position to the other. Corrosion resistant zinc plated steel tubing. 10" lift travel, maximum lift 24". Rated at 1000 lbs. tongue weight capacity. Swing- up jack has a convenient side wind handle and a tough 6" diameter polypropylene wheel.

Gray cast iron
Large, steel eye
Available coated in black PVC or aluminum-painted finish

Navy anchors combine weight with flukes to dig in and hold firmly in sand and mud. The reverse action of the shank allows quick retrieval of a fouled anchor. High-quality gray iron casting, available with aluminum-painted or black PVC-coated finish.

Penetrating fluke anchors dig into mud, sand, or gravel, and stow flat. Pivoting flukes rotate downward into bottom. Excellent weight-to-holding-power ratio, compared to cast anchors. All Attwood penetrating anchors are manufactured of hot dip galvanized steel for corrosion resistance and strength. The assembly is arc-welded steel that maintains consistent fluke-to-shank angles, ensuring quick penetration and a firm hold. These anchors feature a slip-ring shank for easy retrieval of a snagged anchor.

Formed, chrome-plated steel wire drink holders are ideal for boats, cars, and RVs. Gimbaled surface-mounting bracket keeps drinks level to prevent spills. Includes mounting screws.

	Pumps up to 200 gallons per hour.
	Includes 42" hose with garden-hose adapter for adding longer hose.
	Lifts water to height of 40".

Note: Not to be used as a permanent bilge pump.

Sahara Bilge Pumps include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance.

Backed by Attwood's 3-Year Warranty!

Sized for boats up to approximately 17 feet. 500 GPH at open flow, 350 GPH at 3.3' head. Draws only 1.5 amps at open flow! 3/4" hose outlet.

S1100 is our most powerful and efficient automatic pump. High capacity for larger boats and yachts. 1100 GPH at open flow, 973 GPH at 3.3' head. 1-1/8" hose outlet.

Float switch installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation

Six strokes pump out one gallon of water. Non-corrosive ABS plastic pump with flexible polyethylene hose. Bottom cap is removable for easy cleaning.

1-1/4" long x 1-1/4" wide
Installation hole size: 1/2" diameter
Depth behind panel: 3-1/4" deep