BERETTA/BENELLI Extended 12 gauge Steel Shot Choke Tubes

Carlson's new line of steel shot choke tubes pattern steel shot extremely well. These choke tubes feature a longer parallel section allowing for less flyers and denser patterns. These choke tubes extend 3/4 " outside the barrel eliminating damage to your barrel caused by prolonged steel shot use. The longer parallel section allows for use of larger steel shot in tighter choke constrictions. They are made of 17-4 stainless with a knurled extension and a blue finish. Each choke tube carries a lifetime warranty. All steel shot sizes may be used in the close and mid-range choke tubes. Do not use steel faster than 1550 FPS or steel shot sizes larger than BBB through the Long Range choke tube.

BERETTA/BENELLI Rifled Choke Tubes

These precision Rifled Choke Tubes are manufactured from 304 high stress stainless steel. Each choke tube protrudes .625 to 1.3 inches from the end of the barrel depending upon which type of firearm the choke tube has been specifically designed for. Each choke tube has a right hand rifle twist, which is 1 to 35. Each choke tube has a groove diameter of .730 of an inch in 12 ga. These choke tubes have a matte black finish and carry a lifetime warranty. If you're looking for improved accuracy from a smooth bore barrel these fine choke tubes will improve your groups.

BERETTA/BENELLI 12 & 20 gauge Sporting Clays Choke Tubes

Carlson's Sporting Clays Choke Tubes are made from 17-4 stainless and precision machined to produce a choke tube that patterns better than standard choke tubes. These choke tubes feature a 25% larger parallel section in the choke thus throwing more consistent patterns than conventional choke tubes. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction laser marked on the end for easy reference. These choke tubes are backed by our lifetime warranty.

Lead shot, Steel Shot, Copperplated Shot, Nickel Shot, Hevi-Shotshells™, and Buck Shot can be used in our Sporting Clay Choke Tubes. Steel shot larger than BBS should not be used in any Sporting Clays Choke Tube tighter than Full Constriction. Our Sporting Clays Choke Tubes will throw tighter/denser patterns than Flush Mount Choke Tubes due to a longer parallel section.

To fit BENELLI 12 gauge Choke Systems

Dead Coyote Choke Tube

For use with Hevi-Shot, Bismuth or lead, this high performance choke tube has been specifically designed for the coyote hunter to deliver devastating downrange patterns upwards of 70 yards when shooting larger shot sizes. Produces very dense patterns when ultilizing T and Buckshot loads. Great for waterfowl and predator hunting.
NOT FOR USE WITH STEEL SHOT

PRICE: $39.95

Carlson's 12 GA Titanium Coated BLACK CLOUD Chokes

GET OUTSTANDING RESULTS WHEN YOU USE THE KNOCKDOWN POWER OF FEDERAL PREMIUM'S BLACK CLOUD™ AMMUNITION WITH CARLSON'S NEW TITANIUM COATED BLACK CLOUD CHOKE TUBE

Federal's new Black CloudT ammunition features devastating penetration which can now be delivered with unique features that help downrange performance increasing hunter success.

The Extended tube is constructed of a Titanium-coated steel, and comes in Mid Range and Long Range models. The titanium coating helps the uniquely designed FliteControl Wad in the Black CloudT ammunition perform downrange with less build-up in the choke and allows the Flitestopper shot to do its job this increasing your take in the field.

These chokes are specifically designed to get the most performance from Federal's new Black CloudT ammunition, but perform extremely well with other steel shotshells. The Long Range model can be used with all steel shot sizes, except T & F, and with ammunition performing at velocities below 1550 fps.

The Mid Range model can be used with all steel shot sizes, and with ammunition that exceeds 1550 fps. Black CloudT ammunition has been designed to be used with choke tubes that do not use porting or wad stopping devices.

Carlson's 12 GA Titanium Coated PRAIRIE STORM Chokes

GET THE MOST FROM FEDERAL PREMIUM'S PRAIRIE STORM™ AMMUNITION
WITH CARLSON'S PRAIRIE STORM CHOKES

The unique FLITECONTROL® wad in Prairie Storm™ Ammunition will deliver inconsistent patterns in ported chokes or when used with wad stopping or stripping devices. This choke uses a special field-tested constriction and length to get the most from Federal Premium Prairie Storm™ Ammunition.

Carlson’s Titanium Coated choke tube allows Federal’s special FLITESTOPPER lead pellets and FLITECONTROL® wad deliver devastating downrange patterns.

This choke performs equally well when used with lead, copper, nickel, Hevi-Shot and steel shot loads.
Carlson’s New Prairie Storm™ choke tube is a proven performer on pheasants and upland birds using
all lead and steel shot loads over extended distances.

PLEASE NOTE: The EARLY SEASON choke tube is a LM constriction and the LATE SEASON choke tube is an IM constriction.
All sizes and speeds of Steel shot may be used in either choke tube.

BENELLI Extended Turkey Choke Tubes

Manufactured from 17-4 heat treated stainless steel to withstand heavy buffered Turkey Shotshells. These choke tubes produce extra tight patterns with copper plated and buffered lead turkey shotshells. These chokes produce dense patterns and carry a lifetime warranty. Our Extended Turkey Chokes extend approximately 1" from the end of the barrel. These chokes have a matte blue finish and should not be used with steel shot.

BERETTA/BENELLI 12 gauge Ported Turkey Choke Tubes

Designed for the serious turkey hunter, each Super Full Choke has been specifically bored to throw the optimum pattern at short and long distances. Each choke is ported allowing gases to escape quickly reducing recoil and muzzle jump in the process. Each Choke Tube is manufactured from aircraft stainless steel and a blue non-reflective finish has been added. Lifetime warranty.

Carlson's Universal Choke Wrench

By far our best selling choke wrench. this very simple, yet "tough" wrench will remove any choke with a slotted end. A key chain has been added to allow you to keep this wrench with you at all times. Made of heat treated stainless steel this wrench will not bend. Will fit 12 ga., 20 ga., 16 ga., 10 ga., and 28 ga. choke systems.

Carlson's T Handle Speed Wrench

Our best wrench to give you more leverage to remove those "hard to get out choke tubes". These wrenches will remove all choke tubes with slotted ends. They will remove any choke down to .690 constriction or extra full.

Carlson's Sporting Clays Speed Wrench

Our fastest choke wrench allows you to remove and insert chokes in just seconds. They are easy to operate using only your index finger and thumb. Simply tighten the black thumb knob on end of wrench and the choke can be easily removed or inserted. Works great in the field, on your bench, or in any situation when you need to get your choke tubes out quickly. Lifetime Warranty.