The only screw in arrow tuning aid the booster is used to customize your FOC (front of center counter balancing). The booster screws into any standard AMO inserts including the Hit insert and threaded to take any target point or broadhead. By adding the 25 grains per piece and 1/2" to total arrow length you can stack as many as need for weight forward penetration. Straight shaft .315" diameter, 6 per pack.

Expandable broadhead is made from Type 3S hard- anodized one-piece billet and uses three methods of blade deployment working together for devastating results. Curved blades are designed to conserve penetrating energy and are held in the closed position until penetration via a rubber o-ring. 100gr. Cutting diameter of 1.99". Package Info: 3/pk

Fixed blade broadhead features a fully machined forged billet, hardcoated ferrule, one piece stainless steel cut-on-contact tip and main blade, one piece stainless steel bleeder blade, and Dual-Rail support and locking system. No screws, washers, retaining rings, crimps or rivets and can be shot as a two or four blade broadhead

Two blade expandable style head that weighs 125 gr and has a 2 3/4" cutting diameter. The main blade is .040" thick and the bleeder is .020" thick. The head doesn't use screws, washers, retaining rings, crimps or rivets.

Expandable style broadhead features the 4-Play cutting tip perfectly aligned to the blades, HyperSlice Samurai style curved .032 stainless steel blades, Type III Hardcoat anodized 7075-T6 alloy ferrule, and a 1.375" cutting diameter. Related Info: Blade rebuild packs for Tremor 100gr.

Anodized one piece billet ferrule uses three methods of deployment. Blades are held in position by O-ring until penetration is complete. Inboard center of gravity blade geometry stays closed on release guaranteeing maximum penetration and cut upon impact

Expandable style broadhead is designed for crossbow application and features a shorter Type III Hardcoat anodized 7075-T6 ferrule with higher mass-centralization then HyperShock and Tremor, super-efficient cut-on-contact rear deployment blades, 4-Play cutting tip aligned perfectly with blades, HyperSlice Samurai style curved .032" stainless steel blades, and 1.375" cutting diameter. Related Info: Blade packs for Xbow XPR 100gr. (

Broadhead features Zero Plane Technology designed to fly like field points and cut-on-impact. The unique three blade design matches your arrows fletching allowing them to pass through the largest animals easily. 036" thick stainless steel blades are surgical sharp and replaceable.

Fixed blade broadhead features the Zero Plain Technology blade design as incorporated in the Sonic and Liberty head along with perfect balance, silent flight, and extreme penetration. 1" cutting diameter and they share the same blades of the 85 grain and 125 grain Sonic heads for interchangeability and convenience

Broadhead features a solid steel body, razor sharp flexible wire, field point accuracy and are absolutely rugged

Unique broadhead features 4 individually replaceable razor sharp blades with a huge square cutting path, titanium ferrule, and thru body design

Unique unmatched accuracy broadhead features 4 individually replaceable solid titanium reversible razor sharp blades with a 3" X 3" square cutting width, 125 grain, titanium ferrule, and thru body design

Made for crossbows, automatic tip activated blade deployment, blades won't deflect on angled shots, blades are locked open before entering target, no o-rings or rubber bands, when ready X-blades can be reset by simply pulling the tip back out. Less than 5/8" flight diameter and over 1 3/8" cutting diameter. For use with 20" or 22" crossbow arrows

Wrench is made of high impact plastic and accommodates 3 or 4 blade broadheads

Side by side dual blade head that was designed for greater wound opening. This one piece head has 6 cutting edges, stainless steel blades, 1 1/8" cutting diameter and weighs 100 gr.

Side by side dual blade head that was designed for greater wound opening. This one piece head has 6 cutting edges, stainless steel blades, 1 3/8" cutting diameter and weights 100gr

Broadhead features a fixed three blade low profile design that files like a field point with 1" cutting diameter and .017 blade thickness.

Two blade fixed position head with a forward position bleeder blade that is designed for field pint accuracy. They weigh 100 gr. and have a 1" cutting diameter. The blades are .045" thick.

Three blade broadhead features Trocar steel point,.030" blade thickness and a 1 1/8" cutting diameter

Popular choice for low poundage bows with fixed cut-on-impact head for increased penetration and has three expanding blades that follow the cut on contact blade producing a large cross-cutting diameter. Has a 1 1/4" cutting diameter with .031" blade thickness

Fixed three blade head has a 1 1/8" cutting diameter, .031" blade thickness and a three point blade locking system.

Great for youth or low poundage bows with a 1 1/8" cutting diameter, .020 blade thickness and a steel Trocar tip. Three blade design

One piece main blade head with curved cutting blade surface for better penetration, back of the main blade is sharpened for greater damage. The cutting diameter is 1 1/8", main blade is .058" thick and the bleeder blade is .045" thick and it weighs 100 gr.

Three blade head to thread one piece cut on impact broad head that features a cut on impact nose, multi-tapered blades with easy to sharpen edges.

Pre season head that will fly and group the same as the Montec. The dark gray color of the lubricious wear resistant coating easily distinguishes it from the sharpened hunting version

100% steel, cut-on contact, fixed blade design features the ANIX blade-locking system with the convenience of easy to replace blades, ultra-sharp 0.030" thick blades, and a 1 1/8" cutting diameter

Fixed three blade head with V notch tip, blades that are sharpened on all edges and have a .020" thickness on the sharpened edge and .035" on the base. They weigh 100 gr. And have a 1 3/16" cutting diameter

Mechanical blade broadhead features a cut-on-impact Trocrazor tip, three stainless steel mechanical main blades, no o-ring design, and first cut tips are aligned with main blades for maximum penetration

Whitetail Special---specially designed for higher kinetic energy bows and whitetail sized game, 3-blade mechanical with a huge 2-inch cut, .035" thick blades, includes practice head, 100gr.

.048 stainless steel cut on contact broad head that delivers devastating hits to turkeys or small game animals

The main blade is spot welded & copper brazed with center ferrule to give the heads a presice 5 degree ferrule and a .055 thick reinforced tip. By simply resharpening these broadheads, they can be used over and over again

Solid high carbon steel, with copper welds teflon coated. Must be hand sharpened. (Add 25 grains when using adaptor.) 3 edge

Solid high carbon steel, with copper brazedand teflon coated, must be hand sharpened. (Add 25 grains when using adaptor.) 3 edge, 1 1/2" cutting diameter, 125 gr., screw-in. PACKAGE INFO: 1 pk. 6 broadheads per pk.

Cut on impact tip design. 1 1/4" cutting diameter. PACKAGE INFO: 6 broadheads per pk

Cut on impact, screw in style head that is all stainless steel

Stainless steel 2 blade broadhead that features a cut on contact diamond shaped tip and an aluminum ferrule

Four-blade stainless steel broadhead that features a cut on contact diamond tip for strength and an aluminum ferrule. Bleeder blades are removable but broadhead must be shot with bleeder blade installed

Fixed, two blade broadhead features a chisel-cut serrated main blade for superior penetration, massive tissue damage, and excellent blood trails resulting in quicker, cleaner kills and recovery of your game. Spin-tested for field point accuracy from the fastest bows

Stainless steel, cut on contact, serrated blade with diamond tip and aluminum ferrule. Main blade is replaceable or can be resharpened.

Expandable style head that features a one piece aluminum ferrule and .032" blades made of stainless spring steel. They weigh 100 grs. and have a 2" cutting width. The blades are held in a closed position by an O-ring during flight and open on impact. They come in a pack of three

Expandable style head that features a one piece aluminum ferrule and .032" blades made of stainless spring steel. They weigh 100 or 125grs. and have a 2 1/2" (100) to 2 3/4" (125) cutting width. The blades are held in a closed position by an O-ring during flight and open on impact.

New stronger, straighter aluminum body with a hard 4140 steel chisel tip. Strong 32/1000's stainless spring steel blades can easily be replaced or sharpened. A safety O-ring keeps the blades from opening in flight. With blades closed it still meets minimum cutting width of 7/8". With blades open, it has a cutting width of 2 1/2" (100) or 2 3/4" (125).

Scaled-down version of the Vortex broadheads. Blades are assembled on ferrule with s spring steel ring. 3 Stainless steel blades, 100 gr., 2" diameter, .032 thickness, zip point. PACKAGE INFO: 1 pk. 3 broadheads per pk.

A scaled down version of the Vortex Pro Extreme. Features a new stronger, straighter aluminum body with a hard 4140 steel chisel tip. Strong 32/1000's stainless spring steel blades can easily be replaced or sharpened. A safety O-ring keeps the blades from opening in flight. With blades closed it still meets minimum cutting width of 7/8". With blades open, it has a cutting width of 2".

Expandable style head with the Spiral-Kut tip which stops wind planning. It has three blades that are .030" thick and has a cutting diameter of 1 3/4". It weighs 100 gr

Fixed broadhead with Spin-Tite Airfoil technology which spin-stabil- izes arrows from the front, reducing aerodynamic drag. Aircraft grade aluminum ferrule is six slotted for V-locking three razor-honed stain- less steel EZ-Flex two blade units featuring Shred-R Mini Gut Hooks. Comes pre-assembled. Talon 125, 6 blades, 125 grain, 1 1/4" diameter, 2 3/8" length, Trocar Tip.

First and only Bh designed exclusively for x-bows and high speed bows. Features spiral-cut tip and 59.8 degree offset kore-kut bleeder blades. Creates wounds that cannot close or clot. Absolute field point accuracy. Only six-blade replaceable Bh on the market. 100 gr.(1 1/4" cutting dia.) Replaceable .024" surgical stainless steel blades. 3-pack

A 2 3/8in cutting surface offering field point accuracy thanks to its inertia trigger cam blade deployment there will be no loss of kinetic energy.

Grasshoppers mount behind the broadhead or field point to keep arrows from getting lost in the grass. Perfect for small game or birds when total penetration is not desired. Weight: 20 gr. Comes with three 55 gr. screws

Fixed position two blade broad head that has a 1 1/8" cutting diameter, weights 85 grains and has .040" blade thickness

Short-profile, 3 blade broadhead features a cutting diameter of 1.25" (1/16" wider then original), a blade thickness of .025", and a chisel tip for bone crushing penetration

A short profile fixed blade design the Mx-4 has a cutting diameter of 1.125" (1/8 wider then the standard 4 blade) 100 grains and with 4 blades with a thickness of .025"(.005" thicker than the standard).

Super strong blended blade can be sharpened. Cut-on-impact styling starts working the instant it makes contact. Bleeder blade follows up with a secondary cut.

The Phantom mx broadhead features a 1-1/8 in cutting diameter with the shorter length of the other mx series brodheads for better accuracy even in high speed bows. .040in thick main blades.036in Bleeder bladeRevised

The Phantom all stainless steel head is super strong and can be resharpened. Ultimate penetration with the cut-on -impact design. The primary blade has .040" thickness and the secondary blade .028 thickness with a 1 1/8" cutting diameter and 200 grains.

The ferrule is made of high strength aluminum and has a detachable Trocar tip

High strength aluminum alloy shank with rotating blades. Detachable Trocar tip. Practice blades & BH wrench

Patented blade retention system does away with bothersome and unreliable rubber bands and "O" rings. Patented ferrule delivers superior flight and unparalleled penetration Patented Trophy Tip point hits with bone crunching results. Blades are ground, honed, and stropped to be the sharpest they can be

NAP Bloodrunner 2 Blade 100gr (3pk), expandable 2 blade broadhead, combination fixed blade and mechanical technologies, low profile 2 1/16" open cutting diameter, 1 1/8" closed cutting diameter, 0.039" thick blades, stainless steel diamize blades

Cut on contact mechanical that delivers a 1 1/2in cutting diameter in the opened position. A 1in closed profile to make them fly like a field point. The blades have a .036" thickness.

Spitfire 100 Gobbler Getter has 3 blades that are .030" thick with a cutting diameter of 1 1/2". Comes with the new Silver Bullet point which crushes bone to immobilize birds quickly. Comes with a free shot placement guide which is laminated to last in every pack

Fixed blade broadhead features an all-steel, one piece design for the ultimate in cut-on-contact design to maximize accuracy and penetration, a 1 1/8" cutting diameter, .027" thick blades, and a Photon Blade Bonding design for unparalleled strength

Aircraft aluminum ferrule for unyielding strength. Stainless steel blades that are .030" thick. This head uses O rings on the ferrule. The cutting diameter is 1 1/4".

NAP Spitfire Xbow Broadhead, Patented blade retention system does away with bothersome and unreliable rubber bands and "O" rings. Patented ferrule delivers superior flight and unparalleled penetration Patented Trophy Tip point hits with bone crunching results. Blades are ground, honed, and stropped to be the sharpest they can be

NAP Spitfire Edge 100gr (3pk), expandable 3 blade broadhead, exclusive straight, serrated blade techonology, includes same features as the Spitfire, 3 offset blades, 100 grains, 1 3/4" cutting diameter, 0.030" Thick 440 Stainless Steel Diamize Blades, No "O" Rings needed

Field point accuracy with no o-rings or rubber bands holding back the surgical sharp blades. Opens to 1 3/4in cutting diameter.

NAP Thunderhead Xbow Broadhead, Slimline design has scooped out sides to cut surface drag and increase penetration.

NAP Thunderhead Edge 100gr (3pk), fixed blade broadhead, exclusive straight, serrated blade techonology, includes same features as the Thunderhead, 3 offset blades, 100 grains, 1 1/8" cutting diameter, 0.030" Thick 440 Stainless Steel Diamize Blades.

New Archery Products Thunderhead Broadhead