Galil and Micro Galil Accessories

A2Z Outdoors

Galil and Micro-Galil Accessories, including rail systems, handguards, front sight rail systems, flashlight mounts, laser mounts and more.

Stocks

Grips

Cheek Rests

Flashlight and Laser Mounts

Slings

Rails and Rail Systems

Bipods and Accessories

Sights

Mags

Tapco Galil / Golani Intrafuse Mag 30rd

Galil owners know that finding reliable magazines for these prized rifles can be a daunting task. TAPCO has now made life a little easier with the introduction of the Galil 30 round magazine. This rugged composite magazine is built for years of use and utilizes a military grade stainless steel spring and anti-tilt follower. (.223 / 5.56mm) Also works on Century Int'l Arms Golani Rifle.

- Black
- 30 Round

Shipping Dimensions
Weight: 0.4 pounds.
Dimensional Weight: 0.37 pounds.
Dimensions: 5.25" (W) x 1.5" (H) x 7.875" (D)
Weight Disclaimer: * Weight may vary based on configuration.

Item Number	Description	Price
MAG2630	Tapco Galil / Golani Intrafuse Mag 30rd Cannot ship to: CA, DC, Denver CO, Vail CO, HI, Chicago IL, Oak Park IL, MA, NY, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH	$25.00

Stocks

Sharp Shooting Stock with or without leg for M16, AR 15, or M4 Carbine

Multi Position Sniper Stock. Aluminum + Polymer

The result of years of research & development. This sniper stock is ideally suited to meet the demands of the precision marksman community. Proven to provide rapid target acquisition, faster & more accurate follow up shots, & quicker target-to-target attainment. Completely adjustable, featuring a rear-folding leg that converts a rifle with a bipod into a stable shooting platform.

	10 positions push button adjustable length of pull of stock.
	New push button controlled fully adjustable cheek rest for height & eye relief with optics.
	Vertically adjustable rubber butt pad.
	Quick release push button leg extension with fine height adjustment button & micro adjustment ring.
	Available without the pod-leg (#ARSNL).
	Push Button leg locks in 3 positions: 0˚, 45˚, 90˚.
	2 quick release sling mount points.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For M4 Style Tube

Materials:
Made of Alum+poly

Measurements:
Weight(gr): 880
Height(cm): 14
Length(cm): 31.5

Shown Mounted and without leg

Shown with leg

Item Number	Description	Price
CA-ARS	Command Arms Sharp Shooting Stock with leg for M16, AR 15, or M4 Carbine, Black	$348.79
CA-ARSG	Command Arms Sharp Shooting Stock with leg for M16, AR 15, or M4 Carbine, Green	$348.79
CA-ARST	Command Arms Sharp Shooting Stock with leg for M16, AR 15, or M4 Carbine, Tan	$348.79
CA-ARSNL	Command Arms Sharp Shooting Stock without leg for M16, AR 15, or M4 Carbine, Black	$192.79
CA-ARSNLG	Command Arms Sharp Shooting Stock without leg for M16, AR 15, or M4 Carbine, Green	$192.79
CA-ARSNLT	Command Arms Sharp Shooting Stock without leg for M16, AR 15, or M4 Carbine, Tan	$192.79

Collapsible commercial spec buttstock. Polymer Made

Upgrade your original commercial spec collapsible buttstock with our innovative one.

	Storage compartment for CR123 batteries.
	Side Picatinny rail - allows addition of Adjustable cheek-rest (#ACP), mag' pouch (#MPS) or shell holder (#SSM).
	Rubber non-slip buttpad with tapered angle, allows faster shouldering & increased comfort with body armor.
	Two ultrasonically welded metal quick release sling mount points.
	All can be easily fit to both left/right handed users.
	Available for mill standard tube too (#CBSM).
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Buffer Tubes

Materials:
Made of Polymer

Measurements:
Weight(gr): 360
Height(cm): 13
Length(cm): 19
Width(cm): 4.3
Diameter(mm): Commercial spec

Item Number	Description	Price
CA-CBS	Command Arms Collapsible commercial spec buttstock. Polymer Made, Black	$65.00
CA-CBSG	Command Arms Collapsible commercial spec buttstock. Polymer Made, Green	$
CA-CBSTAN	Command Arms Collapsible commercial spec buttstock. Polymer Made, Tan	$

Grips and Forends

Ergonomic Vertical Grip (Fits all Picatinny Rails)

Distinctive ergonomically designed tactical vertical grips.

• Facilitates natural fighting stance holds on your rifle
• Improved performance and reaction time, reduces “on target” time increases muzzle control during rapid fire
• Ergonomically designed with finger grooves
• Plugged storage compartment

Available in Desert Tan, Black, and OD Green

Item Number	Description	Price
CA-AVG	Command Arms AK-47 Ergonomic Vertical Grip, Black (Fits all Picatinny Rails)	$20.39
CA-AVGG	Command Arms AK-47 Ergonomic Vertical Grip, OD-Green (Fits all Picatinny Rails)	$20.39
CA-AVGT	Command Arms AK-47 Ergonomic Vertical Grip, Tan (Fits all Picatinny Rails)	$20.39

Quick Detachable Vertical Grip (with compartment for 3 Lithium 123 batteries)

Front Arm Vertical Grip With Waterproof Compartment. Polymer Made
Quick detach, mold polymer vertical grip.

	Utilizing a twist tightening design.
	Waterproof battery storage for 3 CR123 batteries.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 84
Height(cm): 12.2
Width(cm): 3.2

Shown on AR

Item Number	Description	Price
CA-BVG	Command Arms Forearms Quick Detachable Vertical Grip (with compartment for 3 Lithium 123 batteries), Black	$29.00
CA-BVGG	Command Arms Forearms Quick Detachable Vertical Grip (with compartment for 3 Lithium 123 batteries), OD Green	$29.00
CA-BVGT	Command Arms Forearms Quick Detachable Vertical Grip (with compartment for 3 Lithium 123 batteries), Tan	$29.00

Ergonomic Vertical Grip

Ergonomic vertical grip with rubber inserts & compartment. (The re-designed #AVG)

Mold polymer ergonomic grip.

	Providing a natural fighting stance.
	Incorporates a storage compartment.
	No tools required, captive thumb nut.

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 110
Height(cm): 11
Width(cm): 4.2

Item Number	Description	Price
CA-EVG	Command Arms Ergonomic Vertical Grip, Black	$20.39
CA-EVGG	Command Arms Ergonomic Vertical Grip, Green	$20.39
CA-EVGT	Command Arms Ergonomic Vertical Grip, Green	$20.39

3 positions Forearm Grip. Polymer Made
Mold polymer three positions folding grip.

	Side push button, allows operator to switch between different grip positions.
	Screw tightening.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 120
Height(cm): 12
Width(cm): 4.2

Positions:
Total 3

Item Number	Description	Price
CA-FVG3	Command Arms 3 Position Vertical Grip, Black	$36.69
CA-FVG3G	Command Arms 3 Position Vertical Grip, Green	$36.69
CA-FVG3T	Command Arms 3 Position Vertical Grip, Green	$36.69

5 positions Forearm Grip. Polymer Made
Mold polymer five positions folding grip.

	Side push button, allows operator to switch between different grip positions.
	Screw tightening.
	No gunsmith required • Mill-standard • Warranty: Lifetime

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 120
Height(cm): 12
Width(cm): 4.2

Positions:
Total 5

Item Number	Description	Price
CA-FVG5	Command Arms 5 Position Vertical Grip, Black	$50.49
CA-FVG5G	Command Arms 5 Position Vertical Grip, Green	$50.49
CA-FVG5T	Command Arms 5 Position Vertical Grip, Tan	$50.49

Side clip short vertical grip

	Incorporates a storage compartment.
	Screw tightened.

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 60
Height(cm): 5.5
Width(cm): 3

Item Number	Description	Price
CA-TVG	Command Arms Thunder Three +1 Finger Vertical Forward Grip, Black	$14.99
CA-TVGG	Command Arms Thunder Three +1 Finger Vertical Forward Grip, Green	$14.99
CA-TVGT	Command Arms Thunder Three +1 Finger Vertical Forward Grip, Tan	$14.99

Side clip vertical grip

	Incorporates a storage compartment.
	Screw tightened.

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 90
Height(cm): 11.2
Width(cm): 3

Item Number	Description	Price
CA-TVG1	Command Arms Thunder Three Finger Vertical Forward Grip, Black	$14.99
CA-TVG1G	Command Arms Thunder Three Finger Vertical Forward Grip, Green	$14.99
CA-TVG1T	Command Arms Thunder Three Finger Vertical Forward Grip, Tan	$14.99

Ergonomic vertical grip with rubber inserts & compartment. (The re-designed #SVG)

Polymer made.

	Incorporates a storage compartment.
	Rubberized front & back for comfortable
	non slip grip surface.
	No tools required, captive thumb nut.
	Removable pressure switch mounts.

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 100
Height(cm): 8.5
Width(cm): 3.8

Item Number	Description	Price
CA-MVG	Command Arms Short Vertical Grip with Rubber gripping surfaces, Black	$20.39
CA-MVGG	Command Arms Short Vertical Grip with Rubber gripping surfaces, Green	$20.39
CA-MVGT	Command Arms Short Vertical Grip with Rubber gripping surfaces, Tan	$20.39

Front Arm Short Vertical Grip. Polymer Made

Mold polymer short vertical grip.

	Comfortable grip surface has control rings for a non-slip grip.
	Incorporates a storage compartment.
	Screw tightened.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 88
Height(cm): 9.6
Width(cm): 3.8

Item Number	Description	Price
CA-SVG	Command Arms Short Vertical Grip, Black	$20.39
CA-SVGG	Command Arms Short Vertical Grip, Green	$20.39
CA-SVGT	Command Arms Short Vertical Grip, Tan	$20.39

AK47 6 Piece Interchangeable Finger Groove Pistol Grip

6 piece interchangeable pistol grip for AK47 and similar type firearms. Grip incorporates multiple finger groove and palm swell inserts (3 each) allowing the user to customize their grip to fit all hand sizes for maximum comfort and control.

• Provides increased control during firing
• Finger grooves, palm swell and contoured backstrap allow and increased powerful grip
• Easily changeable front and rear rubberized grip inserts mount securely
• Mottled surface minimizes risk of slippage when wet
• Easily replaces standard grip
• Constructed of high density polymer
* Optional target stand (UPGS) sold separately

Optional Target Shooting Stand

Item Number	Description	Price
CA-UPG47	Command Arms AK47 6 Piece Interchangeable Finger Groove Pistol Grip, Black	$39.99
CA-UPG47G	Command Arms AK47 6 Piece Interchangeable Finger Groove Pistol Grip, Green	$39.99
CA-UPG47T	Command Arms AK47 6 Piece Interchangeable Finger Groove Pistol Grip, Tan	$39.99
CA-UPGS	Command Arms Target Stand for UPG47, Black	$14.29
CA-UPGSG	Command Arms Target Stand for UPG47, Green	$14.29
CA-UPGST	Command Arms Target Stand for UPG47, Tan	$14.29

Mako FFA-T4 Flashlight Adapter with incorporated Grip

Nothing simmilar exists!
This Adapter is made for the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight.
The adapter will fit any long weapon with a picatinny / weaver rail.
Features:

� Fits the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight.
� Quick flashlight detachment. � Transforms a horizontal grip to a vertical grip for different shooting applications.
� When in horizontal position - just push grip open and it locks in Vertical position.
� When in vertical position - press button and fold back.
� Natural "fighting stance" hold on your rifle.
� Designed to mount on Picatinny or weaver rail.

FFA-T4 Flashligh Adapter with incorporated Grip

Item Number	Description	Price
FFA-T4	Mako FFA-T4 Flashlight Adapter with incorporated Grip	$79.90

Mako Grip Tactical Foregrip with 1 Inch Flashlight adapter and On/Off Trigger

This unique tactical grip allows the operator to use his 1" Flashlight.
. The most ergonomically designed vertical foregrip.
. Has storage compartment for batteries, cleaning kit...
. A 1" flashlight mount is incorporated along with an On/Off Trigger located on the grip itself.
(No need for bulky and pricy pressure switches.
. Fits any weapon with a weaver or picatinny rail.
. Mounted using a quick release locking system with an additional locking screw as backup.
. No gunsmithing required.
. Molded from reinforced polymer composite.
. Super lightweight.

Item Number	Description	Price
T-GripB	Mako Grip Tactical Foregrip with 1 Inch Flashlight adapter and On/Off Trigger, Black	$79.20
T-GripG	Mako Grip Tactical Foregrip with 1 Inch Flashlight adapter and On/Off Trigger, Green	$79.20
T-GripT	Mako Grip Tactical Foregrip with 1 Inch Flashlight adapter and On/Off Trigger, Tan	$79.20

Mako MIKI The world's most Ergonomic Flashlight adapter

The world's most ergonomically designed grip, featuring the most comfortable and natural "fighting stance".
. This unique grip permits several gripping positions, such as forearm, foregrip and many others. Most important is the way it fits perfectly in your hands.
. Designed to hold any 1 1/8" diameter flashlight like the Streamlight Stinger and Inova T4.
. Easy to fit on any firearm with a weaver or picatinnt rail.
. The flashlight is secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargable flashlights.
. No gunsmithing required.
. Molded from reinforced polymer composite.
. Super Lightweight.

MIKI The world's most Ergonomic Flashlight adapter

Item Number	Description	Price
MIKI118	Mako MIKI The world's most Ergonomic Flashlight adapter	$50.65

Mako T-GripR Tactical Foregrip with 1 Inch Flashlight adapter w/ rear Activation

This unique tactical grip allows the operator to use his 1" Flashlight.
. The most ergonomically designed vertical foregrip.
. Has storage compartment for batteries, cleaning kit...
. A 1" flashlight mount is incorporated along with an On/Off rear activation.
(No need for bulky and pricy pressure switches.
. Fits any weapon with a weaver or picatinny rail.
. Mounted using a quick release locking system with an additional locking screw as backup.
. No gunsmithing required.
. Molded from reinforced polymer composite. . Super lightweight.

T-GripR Tactical Foregrip with 1" Flashlight adapter w/ rear Activation

Item Number	Description	Price
TGRIPR	Mako T-GripR Tactical Foregrip with 1 Inch Flashlight adapter w/ rear Activation	$79.20

Mako FGG-S Tactical Folding Grip

� Transforms a horizontal grip to a vertical grip for different shooting applications.
� When in horizontal position - just push grip open and it locks in Vertical position.
� When in vertical position - press button and fold back.
� Natural "fighting stance" hold on your rifle.
� Designed to mount on Picatinny or weaver rail.
� Designed mount on most handguns
(In this case - you must register handgun with ATF an Any Other Weapon)
� Saftey extention to prevent slipping of hand when shooting with handgun.
� Reinforced plastic composite.
� Super light weight.
� No gunsmithing is required.

FGG-S Tactical Folding Grip

Item Number	Description	Price
FGG-SB	Mako FGG-S Tactical Folding Grip, Black	$41.25
FGG-SG	Mako FGG-S Tactical Folding Grip, Green	$41.25
FGG-ST	Mako FGG-S Tactical Folding Grip, Tan	$41.25

Mako AG-44S Ergonomic Quick Release Foregrip

• Easy to fit and secure - Quick Release button.
• Fits hand guards equipped with a Weaver or Picatinny rail system.
• Natural Fighting stance hold on your rifle - Slightly angeled to counter recolil.
• Improved performance in reaction, on target time and muzzle control during rapid fire.
• No gunsmithing is required.
• Quick Release mechanism.
• Moulded from reinforced plastic composite.
• Super lightweight.

AG-44S Ergonomic Quick Release Foregrip

Item Number	Description	Price
AG44-SB	Mako AG-44S Ergonomic Quick Release Foregrip, Black	$35.50
AG44-SG	Mako AG-44S Ergonomic Quick Release Foregrip, Green	$35.50
AG44-ST	Mako AG-44S Ergonomic Quick Release Foregrip, Tan	$35.50

Mako TAL-4 Tactical Vertical Grip

- No Slip Design
- Double sided pressure pad housing
- Internal water-proof battery compartment
- Quick-release attachment mechanism
- Additional locking screw option
- Durable and lightweight polymer construction
- Easy to mount, requires no gunsmithing
- Available soon in OD Green and Desert Tan

TAL-4 Tactical Vertical Grip

Item Number	Description	Price
TAL-4B	Mako TAL-4 Tactical Vertical Grip, Black	$37.30
TAL-4G	Mako TAL-4 Tactical Vertical Grip, Green	$37.30
TAL-4T	Mako TAL-4 Tactical Vertical Grip, Tan	$37.30

Mako T-POD Tactical Foregrip & Bipod

The T-Pod, our newest vertical grip, is based on the design of our very popular TAL-4 product, the foregrip we developed a little over a year ago at the request of the Drug Enforcement Agency (DEA). However, the T-Pod also includes an incorporated fully adjustable bipod, offering even more functionality!

	Aluminum bipod legs, adjust to 4 positions
	Dual pressure pad cutouts for light/laser pressure pads
	Quick-deploying mechanism provides a very stable bipod with a wide stance.

The T-POD is made in Israel by FAB Defense and features a lifetime warranty.

T-POD Tactical Foregrip & Bipod

Item Number	Description	Price
T-PODB	Mako T-POD Tactical Foregrip & Bipod, Black	$123.35
T-PODG	Mako T-POD Tactical Foregrip & Bipod, Green	$123.35
T-PODT	Mako T-POD Tactical Foregrip & Bipod,	$123.35

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment

Quickly transforms from a horizontal grip to a vertical grip.

� Offers 7 different grip positions for various tactical shooting options.
� Grip can be slipped-on or side-mounted on a Picatinny rail.
� Large storage compartment.
� State-of-the-art ergonomic design.
� Heavy duty polymer construction.
� Fits all standard Picatinny rails.
� Available in the following camouflage colors: Black, Desert Tan, and Olive Drab Green.

TFL Tactical Vertical Folding Grip w/ Storage Compartment

Item Number	Description	Price
TFL-B	Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Black	$40.25
TFL-G	Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Green	$40.25
TFL-T	Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Tan	$40.25

Cheek Rests

Command Arms Adjustable Cheek Rest. Polymer Made

Fully adjustable cheek rest. Designed to mount on the #CBS butt stock’s Picatinny rail.

	Adjustable for height with thumb knob (2.4cm range).
	By moving horizontally along the Picatinny rail, allows proper eye relief of scoped rifles.
	All can be easily fit to both left/right handed users.
	Compatible with all #CBS style buttstocks & #PRFCS.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Command Arms Stock CBS

Materials:
Made of Polymer

Measurements:
Weight(oz): 3.6
Height(cm): 9.1
Length(cm): 11.6

Item Number	Description	Price
CA-ACP	Command Arms Adjustable Cheek Rest, Black	$30.59
CA-ACPG	Command Arms Adjustable Cheek Rest, Green	$30.59
CA-ACPT	Command Arms Adjustable Cheek Rest, Tan	$30.59

Command Arms Cheek Rest

Cheek Rest For Existing Stock - 1.4cm Rise. Polymer Made

Raise your eye level for proper sight or optic alignment - raise: 1.4cm.

	Installs instantly on most collapsible stocks.
	Made of rugged glass reinforced polymer to withstand harsh tactical conditions.
	No tool installation, snaps into place.
	Fits “ribbed” collapsible style stocks.
	Ideal with #CBS butt stock.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For M4 style stocks

Materials:
Made of Polymer

Measurements:
Weight(gr): 50
Length(cm): 9.7
Width(cm): 5.4

Rise:
cm 1.4

Item Number	Description	Price
CA-CP1	Command Arms Cheek Rest, Black	$15.29
CA-CP1G	Command Arms Cheek Rest, Green	$15.29
CA-CP1T	Command Arms Cheek Rest, Tan	$15.29

Command Arms Cheek Rest For Existing Stock - 2.6cm Rise. Polymer Made

Raise your eye level for proper sight or optic alignment - raise: 2.6cm.

	Installs instantly on most collapsible stocks.
	Made of rugged glass reinforced polymer to withstand harsh tactical conditions.
	No tool installation, snaps into place.
	Fits “ribbed” collapsible style stocks.
	Ideal with #CBS butt stock.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For M4 style stocks

Materials:
Made of Polymer

Measurements:
Weight(gr): 56
Height(cm): 13.1
Length(cm): 6.5

Rise:
cm 2.6

Item Number	Description	Price
CA-CP2	Command Arms Cheek Rest For Existing Stock - 2.6cm Rise. Polymer Made. Black	$15.29
CA-CP2G	Command Arms Cheek Rest For Existing Stock - 2.6cm Rise. Polymer Made. Green	$15.29
CA-CP2T	Command Arms Cheek Rest For Existing Stock - 2.6cm Rise. Polymer Made.	$15.29

Flashlight and Laser Mounts

Command Arms Dual Aluminum Picatinny Mount For Laser & Light. Aluminum Made

At the same one-unit mount, you can strongly attach laser (19mm) & flashlight (25.4mm) to your weapon.

	Very slim design, keeps the accessories close to the weapon.
	Separate locking screw for each accessory.
	Allows rear thumb on/off operating, or remote switch.
	Can be mount to the weapon in many forms – left/right/top/bottom.
	Maintain zero.
	No gunsmith required • Mill-standard • Warranty: lifetime

Eligibility:
For Picatinny

Materials:
Made of Aluminum

Measurements:
Diameter(mm): 25.4mm & 19mm
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-AL134	Command Arms Dual Aluminum Picatinny Mount For Laser & Light. Aluminum Made	$55.00

Command Arms Aluminum 1.9cm Picatinny Mount For Laser & Light. Aluminum Made

Strong aluminum mount for both together - laser & flashlight.

	Very slim design, keeps the accessory close to the weapon.
	Allows rear thumb on/off operating or remote switch.
	Can be mount to the weapon in many forms – left/right/top/bottom.
	Made for body diameters: 19mm.
	Maintain zero.
	No gunsmith required • Mill-standard • Warranty: lifetime

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 19
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-AL34	Command Arms Aluminum 1.9cm Picatinny Mount For Laser & Light. Aluminum Made	$47.00

Screw tightened flashlight/laser mount. Low profile screw tightened
light/laser mount - 25.4mm.

Polymer made.

	Low profile & slim shape.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Slides & lock on rail.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 25.4

Mechanism:
Lock Screw tightened

Item Number	Description	Price
CA-PLS1	Command Arms Screw tightened flashlight/laser mount. Low profile screw tightened light/laser mount - 25.4mm, black.	$29.00
CA-PLS1G	Command Arms Screw tightened flashlight/laser mount. Low profile screw tightened light/laser mount - 25.4mm, green.	$29.00
CA-PLS1T	Command Arms Screw tightened flashlight/laser mount. Low profile screw tightened light/laser mount - 25.4mm, tan.	$29.00

Command Arms Low profile screw tightened light/laser mount - 25.4mm.

Polymer made.

Quick release flashlight/laser mount.

	Operator can easily access on/off button with thumb, while using a vertical grip.
	Slides & lock on rail.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 25.4

Mechanism:
Lock Quick Release

Item Number	Description	Price
CA-PLS1Q	Command Arms Low profile screw tightened light/laser mount - 25.4mm.	$29.00

Command Arms Low profile screw tightened light/laser mount - 19mm

Polymer made.

Screw tightened flashlight/laser mount.

	Operator can easily access on/off button with thumb, while using a vertical grip.
	screw lock on rail.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 19

Mechanism:
Lock Screw Tightened

Item Number	Description	Price
CA-PLS34	Command Arms Low profile screw tightened light/laser mount - 19mm	$29.00

Command Arms 5 Positions Light/laser Mount -18-20.5mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Side clamp on to the Picatinny rail - screw lock.
	Change positions by simple action: push/pull/rotate.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in Push Button Quick Release (#UFH1Q).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 18-20.5
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-UFH1	Command Arms 5 Positions Light/laser Mount -18-20.5mm. Polymer Made, Black	$29.00
CA-UFH1G	Command Arms 5 Positions Light/laser Mount -18-20.5mm. Polymer Made, Green	$29.00
CA-UFH1T	Command Arms 5 Positions Light/laser Mount -18-20.5mm. Polymer Made,	$29.00

Command Arms 5 Positions Quick Release Light/laser Mount - 18-20.5mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Slide clamp on to the Picatinny rail - push button quick release lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in screw tightening (#UFH1).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(in): .71" - .81"
Weight(lbs): .15

Item Number	Description	Price
CA-UFH1P	Command Arms 5 Positions Quick Release Light/laser Mount - 18-20.5mm. Polymer Made, Black	$29.00
CA-UFH1PG	Command Arms 5 Positions Quick Release Light/laser Mount - 18-20.5mm. Polymer Made, Green	$29.00
CA-UFH1PT	Command Arms 5 Positions Quick Release Light/laser Mount - 18-20.5mm. Polymer Made, Tan	$29.00

Command Arms 5 Positions Light/laser Mount - 21.3-23.8mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Side clamp on to the Picatinny rail - screw lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in Push Button Quick Release (#UFH2Q).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 21.3-23.8
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-UFH2	Command Arms 5 Positions Light/laser Mount - 21.3-23.8mm. Polymer Made, Black	$29.00
CA-UFH2G	Command Arms 5 Positions Light/laser Mount - 21.3-23.8mm. Polymer Made, Green	$29.00
CA-UFH2T	Command Arms 5 Positions Light/laser Mount - 21.3-23.8mm. Polymer Made,	$29.00

Command Arms 5 Positions Quick Release Light/laser Mount - 21.3-23.8mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Slide clamp on to the Picatinny rail - push button quick release lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in screw tightening (#UFH2).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(in): .84" - .94"
Weight(lbs): .15

Mechanism:
Lock Quick Button

Item Number	Description	Price
CA-UFH2P	Command Arms 5 Positions Quick Release Light/laser Mount - 21.3-23.8mm. Polymer Made, Black	$29.00
CA-UFH2PG	Command Arms 5 Positions Quick Release Light/laser Mount - 21.3-23.8mm. Polymer Made, Green	$29.00
CA-UFH2PT	Command Arms 5 Positions Quick Release Light/laser Mount - 21.3-23.8mm. Polymer Made,	$29.00

Command Arms 5 Positions Light/laser Mount - 24.4-27mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Side clamp on to the Picatinny rail - screw lock.Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in Push Button Quick Release (#UFH3Q).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 24.4-27
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-UFH3	Command Arms 5 Positions Light/laser Mount - 24.4-27mm. Polymer Made, Black	$29.00
CA-UFH3G	Command Arms 5 Positions Light/laser Mount - 24.4-27mm. Polymer Made, Green	$29.00
CA-UFH3T	Command Arms 5 Positions Light/laser Mount - 24.4-27mm. Polymer Made,	$29.00

Command Arms 5 Positions Light/laser Mount - 28.2-30.5mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Side clamp on to the Picatinny rail - screw lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in Push Button Quick Release (#UFH4@).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 28.2-30.5
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-UFH4	Command Arms 5 Positions Light/laser Mount - 28.2-30.5mm. Polymer Made, Black	$29.00
CA-UFH4G	Command Arms 5 Positions Light/laser Mount - 28.2-30.5mm. Polymer Made, Green	$29.00
CA-UFH4T	Command Arms 5 Positions Light/laser Mount - 28.2-30.5mm. Polymer Made,	$29.00

Command Arms 5 Positions Quick Release Light/laser Mount - 28.2-30.5mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Slide clamp on to the Picatinny rail - push button quick release lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in screw tightening (#UFH4).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(in): 1.11" - 1.20"
Weight(lbs): .15

Mechanism:
Lock Quick Button

Item Number	Description	Price
CA-UFH4P	Command Arms 5 Positions Quick Release Light/laser Mount - 28.2-30.5mm. Polymer Made, Black	$29.00
CA-UFH4PG	Command Arms 5 Positions Quick Release Light/laser Mount - 28.2-30.5mm. Polymer Made, Green	$29.00
CA-UFH4PT	Command Arms 5 Positions Quick Release Light/laser Mount - 28.2-30.5mm. Polymer Made,	$29.00

Mako PLA1 1 & 1 1/8 Inch Tactical Flashlight Mount - Quick Release

• Exceptional design detail.
• 1 inch bore - fits most 1" flashlights (Surefire, Pelican, Beamshot....).
• Fits all types of Picatinny rails.
• Efficient and easy to fit.
• Quick release mechanism.
• Special angle-lip design for easy flashlight slide in.
• Moulded from reinforced plastic composite.

PLA1 1" Tactical Flashlight Mount - Quick Release

Item Number	Description	Price
PLA1	Mako PLA1 1 Inch Tactical Flashlight Mount - Quick Release	$24.00

Mako PLS1 Tactical side mount for 1 Inch diameter flashlights

PLS1 Tactical side mount for 1" diameter flashlights

Item Number	Description	Price
PLS1	Mako PLS1 Tactical side mount for 1 Inch diameter flashlights	$29.35

Slings

Command Arms Sling

Ideal for tight quarters combat, allowing easy movement when
operating inside tight spaces. One Point Sling.

Textile Made

	Maintains its structure for easy donning.
	Sling easily snaps onto many mounting locations.
	Fully adjustable sling fits all body sizes.
	Quick release side buckle.
	Constructed from 1.5” nylon web.
	Upgraded tubular webbing with fully enclosed bungee portion, allowing for increased durability.
	Ideal to be use with our sling mounts: #OPSM or #OPSMP.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Sling mounts

Materials:
Made of Nylon

Measurements:
Weight(gr): 136
Length(cm): 80
Width(cm): 4

Item Number	Description	Price
CA-OPS	Command Arms	$35.00

Command Arms One point sling & swivel adaptor

Aluminum & Textile Made

PBSS - Push button design for quick detachment.

S1P - Ideal for tight quarters combat, allowing easy movement when operating inside tight spaces.

	Maintains its structure for easy donning.
	Sling easily snaps onto many mounting locations.
	Fully adjustable sling fits all body sizes.
	Quick release side buckle.
	Upgraded tubular webbing with fully enclosed bungee portion, allowing for increased durability.
	Ideal to be use with our #CB16 buttstock &#RONI systems.
	Position properly & secure.
	Design for left/right handed users.
	No gunsmith required • Mill-standard • Warranty: 10 years

Item Number	Description	Price
CA-OPSPBSS	Command Arms One point sling & swivel adaptor	$49.00

Rails and Rail Systems

Aluminum Rail System for Sniper Galil

Four rail Picatinny handguard for the Galil / Golani provides a rigid lightweight accessory platform. Handguards provides excellent mounting positions

XGS - CNC Machined aluminum 4 rail handguard for the Sniper Gali

Item Number	Description	Price
CA-XGS	Command Arms Aluminum Rail System for Sniper Galil	$539.09

Galil/Golani Rail System

Four rail Picatinny handguard for the Galil / Golani provides a rigid lightweight accessory platform. Handguards provides excellent mounting positions

• GRS - Polymer handguard ideal for Galil / Golani

Item Number	Description	Price
CA-GRS	Command Arms Galil/Golani Rail System	$69.29

Mako VFR-GA Galil Aluminum Rail System

	Fits all GALIL models (not micro).
	Solid & stable Long upper rail, underside rail & side rails
	Twin short-rails on either side of front sight
	Conforms to MIL-STD 1913
	No modification or gunsmithing required
	Precision machined from solid block of
	aviation grade aluminum
	Comes with rail covers to protect grip and provide thermal insulation available in
	different camouflage colors

VFR-GA Galil Aluminum Rail System

Item Number	Description	Price
VFR-GA	Mako VFR-GA Galil Aluminum Rail System	$478.75

Mako GX6 Micro Galil Integrated 6 Rail System

Specifically designed and manufactured to give a 100% secure fit that does not restrict barrel movement. The GX6 incorporates the world renowned "side by side" rails, mounts on to the front sight of the weapon with a floating fore grip to provide a six rail system, compliant with MIL-STD 1913. The GX6 has been designed to fulfil the increasing demand for weapon mounted optical and laser devices. This product is of superb quality and with a secure, non-movable rail system; the GX6 is the Ultimate weapon Accessory, ensuring maximum accuracy and stability during the toughest workout of your weapon.

GX6 Micro Galil Integrated 6 Rail System

Item Number	Description	Price
GX6	Mako GX6 Micro Galil Integrated 6 Rail System	$478.75

Bipods and Accessories

Command Arms Lower Picatinny Rail Mount Base For Command Arms Bipod

If you have a lower Picatinny rails on your weapon, with the #NB you can fit the CAA bi-pods (#NBP / #NBPS)
on a lower position, so the center of gravity is now even more sable.

	Keeps the lower handguard clean for accessories.
	The whole mechanism is well covered.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Alum+Poly

Item Number	Description	Price
CA-BASE	Command Arms Lower Picatinny Rail Mount Base For Command Arms Bipod	$58.00

Command Arms Picatinny Below Mounted Detachable Bi-Pods. Aluminum Made

Versatile bipod, mounts onto a Picatinny rail. Ideal for snipers, sharpshooters & other missions.

	Legs can be attached/detached with two swift movements.
	Due to the included #RB adaptor, allows Picatinny rail for the addition of forearm grip & other devices.
	New recessed design, allows legs to be mounted higher, giving a more stable center of gravity.
	Comfortable rubber covers legs, allowing a non-slip grip.
	Operating the pods separately. Each pod is not depending on the other at all.
	Quick release push button leg extension.
	Legs manufactured from stainless steel.
	No external springs - the whole mechanism is well covered.
	Redesigned feet provide increased stability.
	Legs can be folded to the front or back.
	Strong lightweight design.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny / #SB

Materials:
Made of Stainless+Poly

Measurements:
Weight(gr): 425
Height Open(cm): 17.5
Height Close(cm): 24.6

Item Number	Description	Price
CA-NBP	Command Arms Picatinny Below Mounted Detachable Bi-Pods. Aluminum Made	$117.00

Command Arms Picatinny Below Mounted Detachable Short Bi-Pods. Aluminum Made

Versatile bipod, mounts onto a Picatinny rail.

Ideal for snipers, sharpshooters & other missions.

	Legs can be attached/detached with two swift movements.
	Due to the included #RB adaptor,allows Picatinny rail for the addition of forearm grip & other devices.
	New recessed design, allows legs to be mounted higher, giving a more stable center of gravity.
	Comfortable rubber covers legs, allowing a non-slip grip.
	Operating the pods separately. Each pod is not depending on the other at all.
	Quick release push button leg extension.
	Legs manufactured from stainless steel.
	No external springs - the whole mechanism is well covered.
	Redesigned feet provide increased stability.
	Legs can be folded to the front or back.
	Strong lightweight design.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny / #SB

Materials:
Made of Alum+Poly

Measurements:
Weight(gr): 375
Height Open(cm): 13.5
Height Close(cm): 17.1

Item Number	Description	Price
CA-NBPS	Command Arms Picatinny Below Mounted Detachable Short Bi-Pods. Aluminum Made	$117.00

Command Arms Side Rail Mount

If you have a side Picatinny rails on your weapon, with the #SB you can fit the CAA
bi-pods(#NBP / #NBPS) on a lower position, so the center of gravity is now even more sable.

Side Picatinny Rail Mount Base For Bipod - Set Of 2. Aluminum Made

	Keeps the lower handguard clean for accessories.
	The whole mechanism is well covered.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Alum+Poly

Item Number	Description	Price
CA-SB	Command Arms Side Rail Mount	$58.00

Command Arms Bipod

To provide even a lower center of gravity & wider legs spread you can side mount the legs & enjoy a
better stability.Picatinny Side Mounts Bi Pods. Stainless+Polymer Made

Eligibility:
For Picatinny

Materials:
Made of Stainless+Polymer

Measurements:
Weight(gr): 395
Height Open(cm): 18
Height Close(cm): 24.5

Item Number	Description	Price
CA-SBP	Command Arms Bipod	$149.00

Command Arms Bipod

The shorter version of the #SBP

Eligibility:
For Picatinny

Materials:
Made of Stainless+Polymer

Measurements:
Weight(gr): 345
Height Open(cm): 14.5
Height Close(cm): 17

Item Number	Description	Price
CA-SBPS	Command Arms Bipod	$149.00

Sights

Command Arms Low profile front flip-up sight

Alum+poly made

	Very low profile & slim shape.
	Can be use as primary or back-up sights.
	Picatinny mount.
	Side operating for both left/right handed users.
	Simple zeroing mechanism.
	No gunsmith required
	Mill-standard
	Warranty:5 years

Item Number	Description	Price
CA-FFS	Command Arms Low profile front flip-up sight	$39.00

Command Arms Low profile rear flip-up sight

Alum+poly made.

	Very low profile & slim shape.
	Can be use as primary or back-up sights.
	Picatinny mount.
	Side operating for both left/right handed users.
	Simple zeroing mechanism.
	No gunsmith required
	Mill-standard
	Warranty: 5 years

Eligibility:
For Picatinny

Materials:
Made of Alum+Poly

Item Number	Description	Price
CA-FRS	Command Arms Low profile rear flip-up sight	$52.00

Other gun accessories too numerous to break down by manufacturer or caliber that may be of interest...

Carlson's Choke Tubes

Amega Ranges Mounts

Ram-Line Stocks

Talley Rings

Weaver Mounts and Bases

Click here to view all of our High Capacity Mags

[ Allen Gun Cases ] [ Amega Ranges ] [ Attwood Marine Products ] [ Big Jon Trolling Systems ] [ Big Jon Accessories ] [ Beretta ] [ Browning Gun Cases ] [ Bulldog Gun Cases ] [ Cabin Critters Plush Toys ] [ Cannon Downriggers ] [ Cannon Accessories ] [ Carry-Lite Turkey Decoys ] [ Champion Traps ] [ Chef's Choice Sharpeners ] [ Choate Gunstocks and Accessories ] [ Do All Outdoors Trap Throwers ] [ Dogtra Dog Training Equipment ] [ DMT Sharpeners ] [ DT Systems Dog Training Equipment ] [ Feather Flex ] [ Fobus Holsters ] [ Innotek Dog Training Equipment ] [ Inova Flashlights ] [ Insight Technology Lights and Lasers ] [ Instructional Videos ] [ Kolpin Gun Cases ] [ Lansky Sharpeners ] [ Mako Tactical Gear ] [ Mr. Heater Portable Heaters ] [ NC Star ] [ Rabbit Decoys ] [ Ram-Line Stocks and Accessories ] [ Remington Brass ] [ Rome Camp Cooking ] [ Shooters Ridge Shooting Accessories ] [ SportDog Dog Training Equipment ] [ Tacstar Shotgun Accessories ] [ Talley Rings and Bases ] [ Tri-Tronics Electronic Dog Training Equipment ] [ Trius Traps ] [ Weaver Mounts Bases Rings ] [ Uncle Mikes ] [ Ultimak Mounts ] [ Vexilar Marine Products ] [ Winchester Brass ] [ Scotty Downrigger and Fishing Accessories ] [ Scotty Downriggers ] [ Minn Kota Accessories ] [ MotorGuide Accessories ] [ Navigation Lights ] [ Order Re-Submit ] [ Heated Water Bowls and Buckets ] [ Sale Items ] [ Indoor/Outdoor Thermometers ] [ AK47/74 Accessories ] [ Benelli Accessories ] [ Browning Accessories ] [ CZ Accessories ] [ Enfield Accessories ] [ Galil and Micro Galil Accessories ] [ Glock Accessories ] [ H&K Accessories ] [ Hi-Point Stocks ] [ Ithica Accessories ] [ H&R Accessories ] [ M1 Carbine Accessories ] [ M16 & AR-15 Accessories ] [ MAK 90 Accessories ] [ Marlin Accessories ] [ Mauser Accessories ] [ Maverick Shotgun Accessories ] [ Micro Uzi Accessories ] [ Mosin Nagant Accessories ] [ Mossberg Shotgun Accessories ] [ New England Firearms Shotgun Accessories ] [ P90 Accessories ] [ Remington Shotgun and Rifle Accessories ] [ Rossi Shotgun Accessories ] [ Ruger Accessories ] [ Savage Accessories ] [ Sig Sauer Accessories ] [ SKS Accessories ] [ Thompson Center Accessories ] [ 1911 Style Pistol Accessories ] [ Uzi and Mini Uzi Accessories ] [ Winchester Accessories ] [ Lyman Reloading ] [ Hornady Reloading Equipment ] [ RCBS ] [ Lee Reloading Equipment ] [ MEC Reloading Equipment ] [ Harris Bipods ] [ Carlsons Chokes ] [ Arrow Rests ] [ Bow Sights ] [ Stabilizers ] [ Redding Reloading Equipment ] [ Animal Deterrents ] [ Bird Baths and Bird Bath Accessories ] [ Bee Houses ] [ Bat Houses ] [ Bird Deterrents ] [ Bird Feeder Hangers ] [ Bird Feeders ] [ Moultire Game Cameras ] [ Archery Releases ] [ Broadheads and Hunting Points ] [ Bow Fishing ] [ Arm Guard and Shooting Gloves ] [ Quivers and Quiver Accessories ] [ Hornady Bullets ] [ Caldwell Shooting Supplies ] [ Duke Traps ] [ Hogue Grips & Stocks ] [ Pachmayr Accessories ] [ Butler Creek Accessories ] [ Timney Triggers ] [ ProMag Magazines and Accessories ] [ MecGar Magazines ] [ Boat Outfitting ] [ Survival Bracelets ] [ Hi Capacity Mags ] [ Sierra Bullets ]

Send us a picture of your trophy and we will post it on our caught it, shot it page for all your buddies to see. Email your pictures to office@a2zoutdoors.com with a description and we will post as we receive them.

Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security. We do not sell or trade any information.

*Any items marked "OUT" are temporarily out of stock. Please Contact Us to check for availability.

RESTRICTED ITEMS Some of the goods on the A 2 Z Outdoors web site may be restricted in your delivery area by Federal, State, and/or Local law. A 2 Z Outdoors does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws. You must be 21 years of age to purchase anything from A 2 Z Outdoors and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area. Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Policies: Click here for a complete listing of our policies including our Privacy Policy.

A2 Z Outdoors is not responsible or liable for any omissions, errors or inaccuracies in any data or information posted or contained on this site, including but not limited to, product prices, features, specifications and technical data or information. In addition A2Z Outdoors reserves the right to change without prior notice any data and information posted or contained on this site, including but not limited to, any product prices, features, specifications and technical data or information. Online orders are restricted to the United States of America. We accept American credit cards only.

Mako FFA-T4 Flashlight Adapter with incorporated Grip

Mako MIKI The world's most Ergonomic Flashlight adapter

Mako T-GripR Tactical Foregrip with 1 Inch Flashlight adapter w/ rear Activation

Mako FGG-S Tactical Folding Grip

Mako AG-44S Ergonomic Quick Release Foregrip

Mako TAL-4 Tactical Vertical Grip

Mako TAL-4 Tactical Vertical Grip, Black

Mako TAL-4 Tactical Vertical Grip, Green

Mako TAL-4 Tactical Vertical Grip, Tan

Mako T-POD Tactical Foregrip & Bipod

Mako T-POD Tactical Foregrip & Bipod, Black

Mako T-POD Tactical Foregrip & Bipod, Green

Mako T-POD Tactical Foregrip & Bipod,

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Black

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Green

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Tan

Mako PLA1 1 & 1 1/8 Inch Tactical Flashlight Mount - Quick Release

Mako VFR-GA Galil Aluminum Rail System

Mako GX6 Micro Galil Integrated 6 Rail System