Used to trickle that last few tenths of a grain of powder into a dropped and weighed charge for “0” variation. Ours has a wide, stable base, is easy to clean, and uses a small amount of powder to fill.

A must-have for filling weighed charges, checking weights and returning powder to the case. Anti-static funnel fits all calibers between 22 and 45. Squared design won’t roll off table.

Hornady’s Bench Rest Powder Measure gives you all the advantages of Lock-N-Load technology with the added benefit of more precise measuring. That precision comes from a specially designed metering insert and a smaller metering chamber to promote more consistent and uniform filling.
The micrometer adjustment gives positive reference for metering adjustments and you can install pre-set metering units by simply pushing the button on the outside of the metering chamber. There’s no need to drain your powder hopper or disassemble the Powder Measure. Simply use the Drain Tube Insert (sold separately) to rapidly and easily return powder to its container. All moving parts have been plated for protection and long life, and the rotor requires NO lubrication.

The Lock-N-Load Powder Measure is the only system that uses a full size powder measure that can be reset to another charge or powder with the push of a button. The unique inserts in the measure can be preset to the charge you use with the caliber you are loading. Push a button, change inserts and powder and you’re ready to go. Inserts can be adjusted for almost any charge. The most flexible (and economical) powder system available for progressive presses. (With optional powder die you never have to readjust for a caliber conversion. It switches instantly.)

Switch this metering unit in and out of your Lock-N-Load Powder Measure with just a push of a button. (One included with Lock-N-Load measure — not compatible with the Bench Rest Grade or Black Powder Measure.)

Switch this metering unit in and out of your Lock-N-Load Powder Measure with just a push of a button. (Not compatible with the Bench Rest Grade or Black Powder Measure.)

A Hornady Exclusive! Swaps with metering inserts so you can drain powder without removing the measure from its stand. (Compatible with Bench Rest Grade Powder Measure.)

Switch metering units in and out of your Lock-N-Load Powder Measure with just a push of a button. (Not compatible with the Bench Rest Grade or Black Powder Measure.)

HORNADY POWDER MEASURE MOUNTING PLATE

Simply insert a Hornady bushing into your RCBS® Rock Chucker or other reloading press using a 1-1/4-12 thread, and you’re ready to take advantage of Hornady’s Lock-N-Load technology. It’s the easiest way to get the most out of your competitor's reloading press.

Lock-N-Load lets you switch from one die to another and begin reloading in seconds. No threading dies in and out or adjusting is necessary. The positive locking action of the bushings holds the dies in rock solid, perfect alignment. You'll want a Lock-N-Load bushing for every die you use.

Simply insert a Hornady bushing into your RCBS® Rock Chucker or other reloading press using a 1-1/4-12 thread, and you’re ready to take advantage of Hornady’s Lock-N-Load technology. It’s the easiest way to get the most out of your competitive reloading press. The Lock-N-Load Conversion Kit includes three die bushings and one conversion bushing.