|

A
2 Z Outdoors

A2Z Outdoors offers a full line of Lee
Reloading Equipment including Lee Reloading Presses, Lee Case Preparation
Equipment, Lee Shell Holders, Lee Priming Tools, Lee Powder Handling Equipment,
Scales, Powder Measures, Reloading Dies, Lee Case Length Gauges, Original Lee
Loaders, Lee Carbide Dies, Lee Bullet Moulds, Lee Casting Furnaces, and Lee
Bullet Sizing and Lubrication Kits.
[ Up ] [ Lee Reloading Presses ] [ Lee Case Preparation Equipment ] [ Lee Powder Handling Equipment ] [ Lee Bullet Feed Kits ] [ Original Lee Loaders ] [ Lee Shotgun Presses and Accessories ] [ Lee Shell Plates and Shell Plate Carriers ] [ Lee Priming Tools ] [ Lee Shell Holders ] [ Lee Reloading Manuals and Software ] [ Lee Rifle Dies ] [ Lee 50 BMG Press Kit, Dies, Shellholders, and Accessories ] [ Lee Pistol Dies ] [ Lee Bullet Casting Equipment ]
|
Lee Load
Master Presses for Pistols |
| Order
Number |
Description
|
Price |
|
|
LEE90936
|
Lee Load Master Press Complete:
9mm Luger
|
$263.00
|
|
| LEE90938 |
Lee Load Master Press
Complete: 38 Special (Will Load 357 Mag.) |
$263.00 |
|
| LEE90940 |
Lee Load Master Press
Complete: 40 S&W |
$263.00 |
|
| LEE90943 |
Lee Load Master Press
Complete: 44 Special (Will Load 44 Mag.) |
$263.00 |
|
| LEE90944 |
Lee Load Master Press
Complete: 44 Magnum |
$263.00 |
|
| LEE90945 |
Lee Load Master Press
Complete: 45 ACP |
$263.00 |
|
| LEE90946 |
Lee Load Master Press
Complete: 45 Colt (Will Load 454 Casull) |
$263.00 |
|
|
Lee Load
Master Presses for Rifles |
|
LEE90922
|
Lee Load Master Press Complete:
223 Remington
|
$263.00
|
|
| LEE90930 |
Lee Load Master Press
Complete: 308 Winchester |
$263.00 |
|
| LEE90931 |
Lee Load Master Press
Complete: 30/06 |
$263.00 |
|
*Purchase
Accessories for Lee Load Master Presses and Lee Pro 1000 Presses Below
*Click
Here for the Bullet Feed Kit for the Loadmaster Press and Pro 1000 Press
| Add a bullet and
pull the lever; all other operations are automatic. One loaded cartridge
with each pull of the lever.
Every operation is
automatic. Primers, like the powder, are fed only if a case is present. No
wasted primers or spilled powder. Alternate loading sequence lets you load
only one case at a time. Makes learning easy for the first time user and
great for fine adjustments or experimenting.
You can start reloading good
ammunition minutes after the press is bolted down.
*All pistol calibers
include carbide dies
*Purchase Accessories for Lee
Load Master Presses and Lee Pro 1000 Presses Below |
Lee
Pro 1000

|
| Order
Number |
Description
|
Price |
|
|
LEE90641
|
Lee Pro 1000 Press: 380 Auto
|
$185.00
|
|
| LEE90636 |
Lee Pro 1000 Press:
38 Special |
$185.00 |
|
| LEE90637 |
Lee Pro 1000 Press:
357 Magnum |
$185.00 |
|
| LEE90638 |
Lee Pro 1000 Press:
45 ACP |
$185.00 |
|
| LEE90640 |
Lee Pro 1000 Press:
9mm Luger |
$185.00 |
|
| LEE90682 |
Lee Pro 1000 Press:
40 S & W |
$185.00 |
|
| LEE90632 |
Lee Pro 1000 Press:
10mm Auto |
$185.00 |
|
| LEE90642 |
Lee Pro 1000 Press:
41 Magnum |
$185.00 |
|
| LEE90634 |
Lee Pro 1000 Press:
44 Special |
$185.00 |
|
| LEE90635 |
Lee Pro 1000 Press:
44 Magnum |
$185.00 |
|
| LEE90643 |
Lee Pro 1000 Press:
45 Colt |
$185.00 |
|
| LEE90633 |
Lee Pro 1000 Press:
223 |
$185.00 |
|
*Click
Here for the Bullet Feed Kit for the Loadmaster Press and Pro 1000 Press
|
Accessories
for Lee Load Master Presses and Lee Pro 1000 Presses |
| Order
Number |
Description
|
Price |
|
|
LEE90667
|
Lee Case Collator: Fits
all four tubes in just 10 seconds, Fits both the Load Master and Pro 1000
Presses
|
$19.69
|
|
| LEE90658 |
Lee Large Case
Feeder: (38 SPECIAL or larger) Fits both the Load Master and Pro 1000
Presses |
$27.00 |
|
| LEE90659 |
Lee Small Case
Feeder: (9mm or Smaller) Fits both the Load Master and Pro 1000
Presses |
$27.00 |
|
| LEE90663 |
Lee Rifle Case
Feeder: (222, 223, 30 M1) Fits both the Load Master and Pro 1000
Presses |
$26.00 |
|
| LEE90661 |
Lee Extra Case
Feeder Tubes (7 Pack) |
$11.99 |
|
| LEE90660 |
Lee Pro 1000
Primer Attachment: For the Pro 1000 Press Only |
$13.00 |
|
| LEE90077 |
Lee Large Primer
Feeder: (38 Special or Larger), for Loadmaster Press Only |
$27.00 |
|
| LEE90075 |
Lee Small Primer
Feeder: (9mm or Smaller), for Loadmaster Press Only |
$27.00 |
|
| LEE90079 |
Lee 5 Hole Turret
for Loadmaster Press Only |
$19.00 |
|
|
Lee
Turret Press
This is the best buy in reloading presses - power and strength to
spare, plus unequalled convenience. The Turret Press is suitable for
loading all rifle and pistol cases, but really shines when loading
large quantities of handgun ammunition. No press can match the
convenience and only a true progressive press is faster. The
T-shaped primer arm is easily reversed for large or small primers.
New four hole
turret
By popular demand the Turret Press is now available with a four
station turret. This welcome upgrade allows you to install your Lee
Factory Crimp Die, taper crimp die in the press. A simple conversion
kit (below) is available if you want to add this feature to your
3-hole press
Why fool around with a
single station press...
screwing dies in and out two and three times for each caliber? No
longer is it necessary to use this batch system for reloading. Now
you can load a complete round with several strokes. Those who want
the utmost in convenience can purchase extra turrets and never
remove the dies. Simply lift out the entire turret and replace with
the next caliber. Dies, shell holders and primer arm can be changed
in seconds without tools.
*90933 4
Hole Upgrade Kit
*90497
Extra Turret 3 Hole
*90269
Extra Turret 4 Hole
|
|

|
| Order
Number |
Description
|
Price |
|
|
LEE90932
|
Lee 4 Hole Turret Press w/Auto
Index
|
$89.00
|
|
| LEE90496 |
Lee 3 Hole Turret
Press Only |
$79.00 |
|
| LEE90933 |
Lee 4 Hole Turret
Press Upgrade Kit |
$23.00 |
|
| LEE90497 |
Lee Extra Turret, 3
Hole, Fits Turret Press, Pro 1000, and Automator |
$16.99 |
|
|
LEE90269 |
Lee Extra Turret, 4
Hole |
$17.05 |
|
|
Lee
Deluxe Turret Press Kit
The rugged Turret Press along with the Auto Disk Powder
Measure, produce top quality pistol ammo in a hurry. A finished round with
a few pulls of the lever. Large enough to handle monster belted magnum
rifle cases. When it is time to change calibers, simply lock in a new
turret and begin loading within seconds. In addition to the Turret Press
and Auto Disk Powder Measure; the kit includes the Lee Safety Scale,
unmatched for sensitivity, a primer pocket cleaner, cutter and lockstud to
trim the cases and a chamfer tool to deburr cases after trimming. A set of
Lee Dies is all that is required to complete this reloading outfit. All
this at a price that will allow you to pay for your investment in a matter
of hours.
This press is ideal for handgun loading and
with experienced hands, you can load over 200 rounds per hour. For those
who wish to use the press as a single station press, the auto index
feature can be disabled in seconds and then re-enabled in the same amount
of time.
GET A TURRET FOR EACH
SET OF DIES.
*90497 Extra
Turret 3 Hole
*90269 Extra
Turret 4 Hole
Once the dies have been
adjusted, they never need readjusting. Simply snap the turret and dies
into the press and you're ready to reload another caliber. |

|
| Order
Number |
Description
|
Price |
|
| LEE90928 |
Lee Deluxe 4 Hole Kit
w/Auto Index |
$130.00 |
|
| LEE90497 |
Lee Extra Turret, 3
Hole, Fits Turret Press, Pro 1000, and Automator |
$16.99 |
|
|
LEE90269 |
Lee Extra Turret, 4
Hole |
$17.05 |
|
|
Lee
Classic Cast Iron Press
Largest opening in the industry and the longest stroke--yet the handle is
adjustable to provide the least handle travel of any press.
Rigid cast iron construction in a classic "O" design for maximum
strength. Baked powder coating is durable and makes the Classic Cast a
handsome addition to any reloading bench.
Adjustable handle is movable from right to left. The start and stop
position is adjustable with a 48 tooth ratchet type handle clamp. In
addition, the handle length is completely adjustable. Shorten when you're
loading handgun and short rifle cases.
Large flat cored base with 3 mounting holes mounts solid to any bench.
Automatic primer arm with bottom of stroke priming for best feel. Includes
two primer arms for large and small primers. No more fumbling with tiny
guides and springs.
Largest 1 1/8 diameter hollow ram to catch every primer with hose fitting
to allow primer disposal directly to a trash can. Supported by over 12
square inches of ram bearing surface.
Threaded die adapter accepts standard 7/8 - 14 dies, remove and the press
accepts 1 1/4 - 12 large series dies.
Powerful compound linkage with positive travel stops prevents toggle or
"cam over."
Accepts standard shell holders, ram insert can be rotated to allow primer
installation on right or left side.
|

|
| Order
Number |
Description
|
Price |
|
|
LEE90998
|
Lee Classic Cast Iron Press
|
$106.00
|
|
|
Lee
Hand Press
A full sized hand held reloading press, yet the tool weighs only 1 1/2
pounds and costs so little you will want more than one. No matter how much
equipment you have, it is really great to have a portable hand press. No
time is wasted mounting a tool to a work bench. When you're finished, pack
it all away.
*90685 Press
Only
*90179 Hand
Press Kit, Includes Press, Ram Prime, Powder Funnel, and Re-Sizing Lube |

|
| Order
Number |
Description
|
Price |
|
|
LEE90685
|
Lee Hand Press
|
$35.00
|
|
| LEE90179 |
Lee Hand Press Kit |
$43.00 |
|
|
Lee
Reloader Press
An outstanding value. Exclusive balanced lever that can't drop down to
pinch your fingers. Unlimited hand clearance that only a "C"
frame can offer. Works equally well with the right or left hand. Even if
you already own a press, an extra press is always useful for decapping,
bullet seating or bullet sizing.
|

|
| Order
Number |
Description
|
Price |
|
|
LEE90045
|
Lee Reloader Press |
$33.00
|
|
|
Lee Breech
Lock Challenger Press
The "O" frame press by design is the
strongest and by far the most popular style press. The larger than
average opening allows for maximum hand clearance.
The spent primer catcher is positive and allows you to route the spent
primers directly to the trash can. Priming is a dream with the Lee Lever
Prime System. Best of all, it includes the Breech Lock Quick Change die
system. Change dies instantly with a twist of the wrist, and you never
have to re-adjust your die. Other features include all steel linkage
with adjustable length lever. This same press costs you over twice as
much from other manufacturers without all of the Challenger's features.
If cost is more important than convenience, you can
leave the Breech Lock bushing locked in the press and screw dies in and
out like any conventional press.
Press includes (3) Breech Lock quick change die
inserts
|

|
| Order
Number |
Description
|
Price |
|
LEE90588
|
Lee Breech Lock Challenger Press |
$69.00 |
|
|
LEE
BREECH LOCK CHALLENGER PRESS KIT
|
|
This kit replaces the popular 35th Anniversary
Kit features the same components as the 50th kit but we have
replaced the Safety Prime with the Auto-Prime and a set of
Auto-Prime shell holders. This kit is for those who prefer to
prime off of the press.
Includes the new Breech Lock Challenger
Press and three Breech Lock quick-change bushings. You get a
complete powder handling system, with the most convenient and
repeatable Perfect Powder Measure. Plus the Lee Safety Scale, the
most sensitive and safest of all powder scales and fill your case
with the included Powder Funnel.
Case Preparation Tools include a cutter and lock
stud to trim your cases. An included Lee chamfer tool
chamfers the inside and outside of the case mouth and a tube of
premium sizing lube is included. A small and large primer
pocket-cleaning tool completes the case preparation package
|
|

|
| Order
Number |
Description
|
Price |
|
LEE90030
|
Lee Breech Lock Challenger Press
Kit |
$141.00 |
|
Every Lee Reloading Tool is
unconditionally guaranteed for two full years.
Every Lee Reloading Tool has a
limited lifetime guarantee.
Please contact the manufacturer for
warranty and service options
Lee Precision Inc.
4275 HIGHWAY U
HARTFORD WISCONSIN 53027
262-673-3075 Voice
262-673-9273 FAX
Text and Graphics courtesy
of Lee Precision Inc.
|