We offer a huge selection of accessories for your AR-15, M16, A2, and M4
rifles. We offer folding stocks, collapsible stocks, rail systems,
magazine couplers, picatinny rail systems, grips, bipods, and much more.
Gun Guide for AR 15
The only current
printed manual that includes information
on ALL models.
Easy to use -- Comb binding lies open and flat on your
work surface.
16 pages & 20+ high-resolution grayscale images.
Cardstock cover. Bright white paper.
Item
Number
Description
Price
GGAR15
Gun Guide for AR15, Free Shipping
$9.00
Elzetta Tactical
Flashlight Mount
Finally, an inexpensive tactical flashlight mount
for the M-16/AR-15 that adjusts for flashlight barrel diameters of .7 to
1.1 inches. This mount can accommodate tailcap pushbutton and barrel
rotating switches as well as pressure pad momentary switches. Available
in three colors, Black, OD Green, and the new Dark Earth. Made in the
USA from glass-filled polymer. Mounts in seconds using the screws and
tool included. Included sizing adapter provides a firm grip on even the
smallest .7 inch tactical light. Mounts on barrels with or without a
bayonet lugs. The mount holds the flashlight firmly in place even during
automatic or rapid fire tactical situations. If your light can take the
pounding and the heat, so can the mount. Mounted accessories do not
interfere with ACOG type sights or tactical lasers mounted on the
receiver. Add a Tactical Rail Kit and you
can mount another accessory on the left or right of the sight. See our
Frequently Asked Questions section below for more information on this
great mount.
Shown with optional Tactical Rail Kit (Flashlight not
included)
Black
OD
Dark Earth
Tactical Rail Kit (fits Weaver or Picatinny) (Flashlight not included)
(Flashlight not included)
Shown with optional Tactical Rail Kit (Flashlight not
included)
Order
Number
Description
Price
ZFH1500B
Elzetta Flashlight Mount, Black (Flashlight not
included)
$29.95
ZFH1500T
Elzetta Flashlight Mount, Dark Earth
(Flashlight not included)
$29.95
ZFH1500G
Elzetta Flashlight Mount, Olive Drab
(Flashlight not included)
$29.95
ZPR1500B
Elzetta Tactical Rail Kit, one rail, screws
and tool, Black (Flashlight not included)
$6.95
AR-15 Strikeforce Pistol
Grip
Ergonomic, Textured Pistol Grip
Uses Original Mounting Hardware for Installation
Virtually Indestructible
Matte Black
Glass-Filled Nylon
Made in USA
Lifetime Warranty
No Gunsmithing
FITS: All
AR-15 and Variants
Order Number
Description
Price
ARA3200
Advanced Technology AR-15 Strikeforce Pistol Grip
$20.00
AR-15 Strikeforce
Package
Six-Position
Collapsible Stock with Adjustable Cheekrest, Buttpad and Pistol Grip
Uses Original
Mounting Hardware for Installation
Virtually Indestructible
Matte Black
Glass-Filled Nylon
Made in USA
Lifetime Warranty
No Gunsmithing
Note: AR-15 Stock Must Be Extended 3" to Operate
Charing Handle
FITS: All AR-15 and Variants
Order Number
Description
Price
ARA3300
Advanced Technology AR-15 Strikeforce Collapsible
Buttstock with Adjustable Cheekrest and Buttpad
$47.00
AR-15 Mag Covers
Protects mag feed lips and ammo from dirt, dust or moisture
Black & Flexible
4 Pack
Bulk Pricing Available
FITS:
.223 AR-15 Mags
Order Number
Description
Price
AR15223
Advanced Technology AR-15 Mag Covers
$9.99
AR-15 Sling
Adapter
Fits round mil-spec handguards
Swivel included
Order Number
Description
Price
ARA1700
Advanced Technology AR-15 Sling Adapter
$9.99
Aluminum 6 Rail Hanguard
Set for M16/AR15/M4Carbine
The X6 is the untimate arms
accessory, ensuring maximum accuracy and stability during the toughest
workout of your weapon. Mounts on the front sight to maintain zero better
than any existing rail system on the market. National Tactical
Officers Association member tested and recommended.
FEATURES
4 MIL-STD-1913 rails on the handguard and 2 additional mini rails on the
front sight.
Markings on rails assist in remounting accessories to the same position.
Constructed of billet aviation aluminium.
Includes 2 long rail covers and 6 short covers.
No gunsmithing required. LIFETIME WARRANTY
Item
Number
Description
Price
CA-X6
Command
Arms Aluminum 6 Rail Hanguard Set for M16/AR15/M4Carbine, Black
$254.99
CA-X6G
Command
Arms Aluminum 6 Rail Hanguard Set for M16/AR15/M4Carbine, Green
$254.99
CA-X6T
Command
Arms Aluminum 6 Rail Hanguard Set for M16/AR15/M4Carbine, Tan
$264.99
Ergonomic
Vertical Grip (Fits all Picatinny Rails)
Distinctive
ergonomically designed tactical vertical grips.
Facilitates natural fighting stance holds on your rifle
Improved performance and reaction time, reduces on target time
increases muzzle control during rapid fire
Ergonomically designed with finger grooves
Plugged storage compartment
Available in Desert Tan, Black, and OD Green
Item
Number
Description
Price
CA-AVG
Command Arms AR-15
Ergonomic Vertical Grip, Black (Fits
all Picatinny Rails)
Command Arms AR-15
Ergonomic Vertical Grip, Tan (Fits all
Picatinny Rails)
$17.99
Front
Arm Short Vertical Grip
Distinctive ergonomically
designed tactical vertical grips.
Facilitates natural fighting stance holds on your rifle
Improved performance and reaction time, reduces on target time
increases muzzle control during rapid fire
Ergonomically designed with finger grooves
Plugged storage compartment
Available in Desert Tan, Black, and OD Green
Item
Number
Description
Price
CA-SVG
Command Arms
AR-15 Front
Arm Short Vertical Grip, Black
$18.99
CA-SVGG
Command Arms
AR-15 Front
Arm Short Vertical Grip, OD Green
$18.99
CA-SVGT
Command Arms
AR-15 Front
Arm Short Vertical Grip, Tan
$18.99
Removable
Carry Handle
Complete carry handle
for AR type rifles. Fits on flat top receivers and acts as a carry
handle and rear sight system. Fully adjustable rear sight with
windage and elevation clicks. Can be used with a variety of scopes,
lasers and lights. Fits M-16 and AR-15 variants.
High quality locking plate
Superior retention with thumb nuts
Long range rear sight adjustment
Machined from aluminum alloy with a matte black anodized finish LIFETIME WARRANTY
Item
Number
Description
Price
CA-CH
Command Arms
Removable
Carry Handle
$39.00
Rotating
Picatinny Rail Belt Clip - 52mm (0.21) or 54mm (0.23)
Keep your hand free by
attaching your flashlight mount and light or any small Picatinny Rail Device
to this ingenuous device.
360° rotation.
Ideal for Law Enforcement Officers, Paramedics, Hikers etc...
52mm (0.21")
Recomended for use with BK1/BK2 or MPS
Item
Number
Description
Price
CA-RC1
Command Arms
Rotating
Picatinny Rail Belt Clip - 52mm (0.21)
$19.99
CA-RC2
Command Arms
Rotating
Picatinny Rail Belt Clip - 54mm (0.23)
$19.99
Tactical
Pistol Grip for AR15/M16/M4
This new tactical pistol
grip is sure to increase the performance of your rifle or carbine. Made
from reinforced polymer composite, it incorporates finger swelts and a
backstrap that is designed with surfacing to enhance your grip and
minimize the chance of slippage should the grip become wet. Storage
compartment on bottom. Light-weight. Grip Length: 4.25 inches/10.5cm. No
gunsmithing required. LIFETIME WARRANTY
Item
Number
Description
Price
CA-G27
Command Arms Tactical
Pistol Grip, Black
$29.00
CA-G27ODG
Command Arms Tactical
Pistol Grip, OD Green
$29.00
CA-G27T
Command Arms Tactical
Pistol Grip, Tan
$29.00
Flashlight/Laser
Mount-3/4 Inch
Flashlight & Laser
mount which can be used on any Picatinny/Weaver rail. Suitable for 3/4"
devices. Easy to fit and dismantle. Light-weight. Molded from reinforced
polymer composite.
Exceptional design detail.
Fits all Picatinny rails.
Efficient and easy to fit.
Quick release mechanism.
Designed for easy flashlight insertion and retention.
Molded from reinforced plastic composite.
Available in Desert Tan, Black, and OD Green
Item
Number
Description
Price
CA-BK1
Command Arms 3/4
Inch Flashlight/Laser Mount, Black
$27.99
CA-BK1ODG
Command Arms 3/4
Inch Flashlight/Laser Mount, OD Green
$27.99
CA-BK1T
Command Arms 3/4
Inch Flashlight/Laser Mount, Tan
$27.99
Forearms
Grip & Flashlight Adaptor
Specially designed ergonomic forearm grip
for steady and fast shooting. Thermal insulation enables prolonged grip
during continuous shooting. Built-in cavitiy for pressure switch wiring.
Comes in two sizes: 1" & 1.08" bores. Easy to fit. No
Gunsmithing is required.
Grip length: 4 inches/10cm
Specially designed forearm grip for steady and fast shooting.
Smooth flat bottom for use on supporting surfaces
Special thermal insulation aids grip during rapid fire sequences
Designed to fit Picatinny rail, easy to attach.
BUilt in cavity for remote switch wiring.
Designed for 1.0" pr 1.08" diameter flashlights. LIFETIME WARRANTY
Item
Number
Description
Price
CA-OFEK1
Command
Arms Forearms Grip and Flashlight Adapter, Black
$22.00
CA-OFEKG
Command
Arms Forearms Grip and Flashlight Adapter, OD-GREEN
$22.00
CA-OFEKT
Command
Arms Forearms Grip and Flashlight Adapter, Tan
Designed as a quick
detachable vertical grip, it features an internal waterproof storage
compartment for up to three lithium 123 size batteries.
The BVG Grip mounts on Picatinny and Weaver rails. The BVG is easily
installed, or removed, by use of a internal threaded tension rod that
securely positions the grip in your choice of location upon the rail. The
batteries are secured inside the waterproof battery compartment utilizing a
plug with an o-ring.
This compact grip provides a comfortable feel in your hand and helps to
prevent muzzle rise and provides waterproof storage of batteries for your
optic or lighting systems.
LIFETIME WARRANTY
Shown on AR
Item
Number
Description
Price
CA-BVG
Command
Arms Forearms Quick Detachable Vertical Grip (with compartment for 3
Lithium 123 batteries), Black
$29.00
CA-BVGG
Command
Arms Forearms Quick Detachable Vertical Grip (with compartment for 3
Lithium 123 batteries), OD Green
$29.00
CA-BVGT
Command
Arms Forearms Quick Detachable Vertical Grip (with compartment for 3
Lithium 123 batteries), Tan
$29.00
6-Rail
Aluminum System for Long M16/AR15/M4
This exceptional design
allows you to fit numerous mission-specific accessories such as forearm
grip, bipod, flashlight and others, on any of the 6 Picatinny/Weaver
Rails. Specifically designed and manufactured to give a 100% secure fit
that does not restrict barrel movement.Constructed of billet aviation
grade aluminum using CNC machinery A 7th adjustable rail may be added
(Sold Separately)Easy to fit. No Gunsmithing required. Accompanied
by 2 Long & 6 Short heat-resistant rail covers. LIFETIME WARRANTY
Item
Number
Description
Price
CA-X6L
Command
Arms 6-Rail Aluminum System for Long M16/AR15/M4, Black
$350.00
CA-X6LG
Command
Arms 6-Rail Aluminum System for Long M16/AR15/M4, Green
$350.00
CA-X6LT
Command
Arms 6-Rail Aluminum System for Long M16/AR15/M4, Tan
$360.00
7-Rail
Aluminum System for Short M16/AR15/M4
This exceptional design
allows you to fit numerous mission-specific accessories such as forearm
grip, bipod, flashlight and others, on any of the 7 Picatinny/Weaver
Rails. Specifically designed and manufactured to give a 100% secure fit
that does not restrict barrel movement. 7th Rail located above the barrel
is adjustable in height to ensure maximum accuracy while using a laser
sight. Constructed of billet aviation grade aluminum using CNC machinery.
Easy to fit. No Gunsmithing required. Accompanied by Long &
Short heat-resistant rail covers. LIFETIME WARRANTY
Item
Number
Description
Price
CA-X6X
Command
Arms 7-Rail Aluminum System for Short M16/AR15/M4, Black
$284.99
CA-X6XG
Command
Arms 7-Rail Aluminum System for Short M16/AR15/M4, Green
$284.99
CA-X6XT
Command
Arms 7-Rail Aluminum System for Short M16/AR15/M4, Tan
$284.99
Aluminum
Side by Side Picatinny/Weaver Rails for Front Sight with Adjustable Third
Rail
Aluminum Side by Side
Picatinny / Weaver Rails for Front Sight with Adjustable Third Rail.
Enables the secure mounting of light and laser devices on the front sight
of M16/AR15/M4. Easy to fit. No Gunsmithing required. Constructed of
billet aviation grade aluminum using CNC machinery. LIFETIME WARRANTY
Item
Number
Description
Price
CA-TPR15X
Command
Arms Aluminum Side by Side Picatinny/Weaver Rails for Front Sight with
Adjustable Third Rail, Black
$55.00
Bayonet
Picatinny Rail Mount for Colt M16/AR15
Specially designed bayonet
adaptor for the secure fitting of light & laser equipment, bipods &
any Picatinny/Weaver Rail mounted device. Easy to fit. No Gunsmithing
required. Constructed of billet aviation grade aluminum using CNC machinery.
Designed for the secure fit of laser & light equipment, bipod and
any Picatinny rail mounted device.
Adaptors secure fit ensures the stability and accuracy of mounted
accessories.
Lightweight
CNC milled from anodized aviation aluminum.
Easy to fit
Secured by Allen bolts
No gunsmithing or modification to the firearm is required.
Item
Number
Description
Price
CA-TM16FA1
Command
Arms Bayonet Picatinny Rail Mount for Colt M16/AR15, Black
$41.00
Polymer Handguard Set
(Rifle) 4 sided Rail
4 sided Picatinny
rail system
Metal heatshields dissipate high tempertures producted during
sustained rapid fire.
Thermal rubber covers enhance grip and protect rails when not in use.
No gunsmithing required, handguards mounts just like factory
handguards.
2 Vented and 2 Non-Vented Rail covers included. LIFETIME WARRANTY
Item
Number
Description
Price
CA-M44L
Command
Arms Polymer Handguard Set (Rifle) 4 sided Rail,
Black
$109.00
CA-M44LODG
Command
Arms Polymer Handguard Set (Rifle) 4 sided Rail,
Green
$109.00
CA-M44LT
Command
Arms Polymer Handguard Set (Rifle) 4 sided Rail,
Tan
$109.00
7-Rail
Aluminum System for Long M16/AR15
This exceptional design
allows you to fit numerous mission-specific accessories such as forearm
grip, bipod, flashlight and others, on any of the 7 Picatinny/Weaver
Rails. Specifically designed and manufactured to give a 100% secure fit
that does not restrict barrel movement. 7th Rail located above the barrel
is adjustable in height to ensure maximum accuracy while using a laser
sight. Constructed of billet aviation grade aluminum using CNC machinery.
Easy to fit. No Gunsmithing required. Accompanied by Long &
Short heat-resistant rail covers. LIFETIME WARRANTY
Item
Number
Description
Price
CA-X6LX
Command
Arms 7-Rail Aluminum System for Long M16/AR15,
Black
$379.99
CA-X6LXG
Command
Arms 7-Rail Aluminum System for Long M16/AR15,
Green
$379.99
CAX6LXT
Command
Arms 7-Rail Aluminum System for Long M16/AR15,
Tan
$389.99
Folding
Vertical Grip - Fits all Picatinny Rails
Vertical & Horizontal
tactical grip, push button release converts grip from horizontal to vertical
Ergonomic design
Skeletonized for reduced weight
Folds under so it is out of the way when not in use LIFETIME WARRANTY
Item
Number
Description
Price
CA-FFG2
Command
Arms Forearms Folding Vertical Grip - Fits all Picatinny Rails, Black
$33.99
CA-FFG2G
Command
Arms Forearms Folding Vertical Grip - Fits all Picatinny Rails, OD Green
$33.99
CA-FFG2T
Command
Arms Forearms Folding Vertical Grip - Fits all Picatinny Rails, Tan
$33.99
M-33
Handguard Set - Military & Police 2 Sided Rail - M-4 Carbine
The M33 is built to fit
the M16/AR15 carbine. Replace your existing hand-guard with this polymer
handguard which provides 2 mounting rails, complete with 2 Vented
and 2 Non-Vented thermal rubber rail covers and heat shields. No
tools or gunsmithing required, handguard mounts just like factory
handguards.
Rails can be mounted on the left/right side, or the top/bottem of the
handguard. LIFETIME WARRANTY
Item
Number
Description
Price
CA-M33
Command
Arms M-33 Handguard Set - Military & Police 2 Sided Rail - M-4
Carbine, Black
$81.00
Polymer
Handguard Set (Carbine) 4-Sided Rail
4 sided Picatinny
rail system
Metal heatshields dissipate high tempertures producted during
sustained rapid fire.
Thermal rubber covers enhance grip and protect rails when not in use.
No gunsmithing required, handguards mounts just like factory
handguards.
FREE RAIL COVERS INCLUDED LIFETIME WARRANTY
Item
Number
Description
Price
CA-M44S
Command
Arms Polymer Handguard Set (Carbine) 4-Sided Rail, Black
$99.99
CA-M44SODG
Command
Arms Polymer Handguard Set (Carbine) 4-Sided Rail, OD Green
$99.99
CA-M44ST
Command
Arms Polymer Handguard Set (Carbine) 4-Sided Rail, Tan
$99.99
Folding
5-Position Forearm Grip
Folding Steady Grip.
Locks at horizontal, vertical, 45 & 135 degree positions.
Improved performance during rapid fire.
* Easy to fit & secure, lightweight.
Fits Picatinny/Weaver Rail.
Molded from reinforced polymer composite.
Length in vertical position: 4.5 inches/11.5cm.
Has a storage compartment for 2 AA Batteries, and requires no gunsmithing. LIFETIME WARRANTY
Item
Number
Description
Price
CA-FFG4
Command
Arms Folding 5-Position Forearm Grip, Black
$44.00
CA-FFG4G
Command
Arms Folding 5-Position Forearm Grip, Green
$44.00
CA-FFG4T
Command
Arms Folding 5-Position Forearm Grip, Tan
$44.00
Sniper
Stock without leg for A2 and SR25
The CAA Sniper Stock is the result of more than two years
of research and development. Designed in conjunction with special units of
the IDF (Israel Defense Force) the CAA Sniper Stock is designed to meet
the demands of the precision marksman community. The Sniper Stock has
proven to provide rapid target acquisition, faster and more accurate
follow up shots, and quicker target-to-target attainment. Operators who
have evaluated the CAA Sniper Stock have found its unique features exceed
all of their requirements. Finally, the ultimate sniper stock for the
M16/AR15/ SR25 is
now available.
» Maintains rifle position, lessening operator fatigue during extended
periods of target observation
» Allows rapid follow-up shots
» Improves target acquisition/observation
» Mounts on existing buffer tubes
» Used by Israeli Special Forces
» Rifle or Carbine Models available
FEATURES
» 10 position push button adjustable length of pull stock
» Fully adjustable (13 horizontal position and 6 position vertical) cheek
rest for height & eye relief to compliment operators choice of optical
equipment
» Vertically adjustable rubber butt pad
» Rear grip for extra stability
» Two quick release sling mount points (one PBSS Push Button Sling Swivel
included)
» Quick release push button leg extension with fine height adjustment of
pod
» 4 position front Picatinny rail for optional vertical grip mounting.* (SRSmodel
only)*
Item
Number
Description
Price
CA-SRSNL
Command
Arms Sniper Stock without leg for A2 and SR25, Black
$219.00
CA-SRSNLODG
Command
Arms Sniper Stock without leg for A2 and SR25, Green
$219.00
CA-SRSNLTAN
Command
Arms Sniper Stock without leg for A2 and SR25, Tan
The CAA Sniper Stock is the result of more than two years of
research and
development. Designed in conjunction with special units of the IDF
(Israel
Defense Force) the CAA Sniper Stock is designed to meet the
demands of the
precision marksman community. The Sniper Stock has proven to
provide rapid
target acquisition, faster and more accurate follow up shots, and
quicker
target-to-target attainment. Completely adjustable and featuring a
rear-folding pod that converts an A2 rifle, SR-25 rifle, or M4
carbine with
a bipod, into a stable shooting platform with three-point support,
the CAA
Sniper Stock is in a class of its own. Operators who have
evaluated the CAA
Sniper Stock have found its unique features exceed all of their
requirements. Finally, the ultimate sniper stock for the M16/AR15/
SR25 is
now available.
» Maintains rifle position, lessening operator fatigue during
extended
periods of target observation
» Allows rapid follow-up shots
» Improves target acquisition/observation
» Mounts on existing buffer tubes
» Used by Israeli Special Forces
» Rifle or Carbine Models available
» Available with or without rear pod
FEATURES
» 10 position push button adjustable length of pull stock
» Fully adjustable (13 horizontal position and 6 position
vertical) cheek
rest for height & eye relief to compliment operators choice of
optical
equipment
» Vertically adjustable rubber butt pad
» Rear grip for extra stability
» Two quick release sling mount points (one PBSS Push Button
Sling Swivel
included)
» Pod locks in 3 positions: 0, 45 & 90 degree (push button
for changing pod
angle)
» Quick release push button leg extension with fine height
adjustment of pod
» 4 position front Picatinny rail for optional vertical grip
mounting.* (SRS
model only)*
Item
Number
Description
Price
CA-SRS
Command
Arms Sniper Stock with leg for A2 and SR25, Black
$369.00
CA-SRSODG
Command
Arms Sniper Stock with leg for A2 and SR25, Green
$369.00
CA-SRSTAN
Command
Arms Sniper Stock with leg for A2 and SR25, Tan
$369.00
Sharp Shooting Stock
with or without leg for M16, AR 15, or M4 Carbine
Included features:
Adjustable cheek piece to compliment the operators choice of optic
equipment
Adjustable rubber recoil pad
Collapsible 10-Position Stock
Rear grip for extra stability
Ambidextrous
Two quick-release sling mounting points
When the weapon is trained on a target for an extended period of time
the ARS maintains the position of the rifle lessening operator fatigue and
distraction.
Available with or without pod.
Shown Mounted and without leg
Shown with leg
Shown with leg
Item
Number
Description
Price
CA-ARS
Command
Arms Sharp Shooting Stock with
leg for M16, AR 15, or M4 Carbine,
Black
$359.00
CA-ARSODG
Command
Arms Sharp Shooting Stock withleg for M16, AR 15, or M4 Carbine,
Green
$359.00
CA-ARSTAN
Command
Arms Sharp Shooting Stock with
leg for M16, AR 15, or M4 Carbine, Tan
$359.00
CA-ARSNL
Command
Arms Sharp Shooting Stock without
leg for M16, AR 15, or M4 Carbine,
Black
$205.00
CA-ARSNLODG
Command
Arms Sharp Shooting Stock without
leg for M16, AR 15, or M4 Carbine,
Green
$205.00
CA-ARSNLTAN
Command
Arms Sharp Shooting Stock without
leg for M16, AR 15, or M4 Carbine, Tan
$205.00
CBS
6 position collapsible stock
Six-position collapsible stock with rubber non-slip recoil
pad and skeletonized design features a Picatinny rail and storage
compartment for CR123 batteries (4 total) or other small items.
Ambidextrous design is easily achieved by switching the battery
compartment lid and Picatinny rail. Two ultrasonically welded metal
inserts allow for the addition of optional quick release sling adaptors (PBSS).
Item
Number
Description
Price
CA-CBS
Command
Arms CBS 6 position collapsible stock, Black
$59.00
CA-CBSODG
Command
Arms CBS 6 position collapsible stock, Green
$59.00
CA-CBSTAN
Command
Arms CBS 6 position collapsible stock, Tan
$59.00
CBST
6 position collapsible stock with tube assembly
NTOA (National
Tactical Officers Association) tested and recommended.
Six-position collapsible stock with rubber non-slip recoil pad and
skeletonized design features a Picatinny rail and storage compartment for
CR123 batteries (4 total) or other small items. Ambidextrous design is
easily achieved by switching the battery compartment lid and Picatinny
rail. Two ultrasonically welded metal inserts allow for the addition of
optional quick release sling adaptors (PBSS).
Includes buffer tube, buffer spring, buffer assembly, nut, and collar
The CBST is designed specifically for a .223 caliber rifle. If you
require a CBS for a .308 caliber carbine, you must use a different buffer,
and spring.
*Magazine attachment (MPS) not included in price.
Item
Number
Description
Price
CA-CBST
Command
Arms CBS 6 position collapsible stock with tube assembly, Black
$93.00
CA-CBSTODG
Command
Arms CBS 6 position collapsible stock with tube assembly, Green
$93.00
CA-CBSTTAN
Command
Arms CBS 6 position collapsible stock with tube assembly, Tan
$93.00
M16/AR15 Mag Pouch
M16/AR15 Picatinny
Magazine Pouch
Picatinny Rail Mounted Pouch.
Quick release mechanism.
Suitable for M16/AR15 Magazine.
Made of High Tech Composite Polymer.
Designed for durability and high performance in tactical use.
Fits any Picatinny Rail including CBS Butt Stock & Belt Clip
The Picatinny belt clip (model RC) not included
Item
Number
Description
Price
CA-MPS
Command
Arms M16/AR15 Mag Pouch, Black
$17.00
CA-MPSODG
Command
Arms M16/AR15 Mag Pouch, Green
$17.00
CA-MPSTAN
Command
Arms M16/AR15 Mag Pouch, Tan
$17.00
Adjustable Cheek Rest
FEATURES
Adjustable Cheek Piece for CBS Picatinny rail
Clamps onto CBS Picatinny rail
Height adjustment for eye alignment with optics
Horizontal adjustment along Picatinny rail
Made from reinforced polymer LIFETIME WARRANTY
Item
Number
Description
Price
CA-ACP
Command
Arms Adjustable Cheek Rest,
Black
$29.99
CA-ACPG
Command
Arms Adjustable Cheek Rest,
$29.99
CA-ACPT
Command
Arms Adjustable Cheek Rest,
$29.99
Stock
Saddle
Ergonomic cheek rest with
two storage compartments for M16/AR15/M4 butt stock.
Features
Greatly increases the cheek support while shooting.
Significantly improves the cheek and head stability while aiming and
shooting - eliminates the typical head movement and fatigue associated
with sighting in targets for extended periods.
Faster target acquisition and stay on target.
Can store up to six CR123 batteries.
Can store cleaning materials and other small gun parts.
Waterproofed.
Lightweight.
Suitable for butt stocks manufactured by CAA, Colt, Bushmaster, Tapco,
Rockriver Arms, Armalite, Colt Canada and many more.
Lifetime warranty.
Available in the following colors: Black, Tan, OD Green.
Item
Number
Description
Price
CA-SST1
Command
Arms Stock Saddle, Black
$25.00
CA-SST1ODG
Command
Arms Stock Saddle, Green
$25.00
CA-SST1TAN
Command
Arms Stock Saddle, Tan
$25.00
Rubberized
Stock Saddle
The SST2 has the same
features as the SST1, but incorporates a rubberized coating for increased
comfort.
Greatly increases the cheek support while shooting.
Significantly improves the cheek and head stability while aiming and
shooting - eliminates the typical head movement and fatigue associated
with sighting in targets for extended periods.
Faster target acquisition and stay on target.
Can store up to six CR123 batteries.
Can store cleaning materials and other small gun parts.
Waterproofed.
Lightweight.
Suitable for butt stocks manufactured by CAA, Colt, Bushmaster, Tapco,
Rockriver Arms, Armalite, Colt Canada and many more.
Lifetime warranty.
Available in the following colors: Black, Tan, OD Green. LIFETIME WARRANTY
Item
Number
Description
Price
CA-SST2
Command
Arms Rubberized Stock Saddle, Black
$32.00
ALUMINUM Handguard Set
(Carbine) 4-Sided Rail (M4)
NOW AVAILABLE IN
ALUMINIUM
4 sided Picatinny rail system
Metal heatshields dissipate high tempertures producted during
sustained rapid fire.
Thermal rubber covers enhance grip and protect rails when not in
use.
No gunsmithing required, handguards mounts just like factory
handguards.
2 Vented and 2 Non-Vented Rail covers included. LIFETIME WARRANTY
Item
Number
Description
Price
CA-M44SM
Command
Arms ALUMINUM Handguard Set (Carbine) 4-Sided Rail, Black
$109.99
CA-M44SMT
Command
Arms ALUMINUM Handguard Set (Carbine) 4-Sided Rail, Tan
$109.99
ALUMINUM Handguard Set
Mid-Length (Carbine) 4-Sided Rail
NOW AVAILABLE IN
ALUMINIUM
4 sided Picatinny rail system
Metal heatshields dissipate high tempertures producted during
sustained rapid fire.
Thermal rubber covers enhance grip and protect rails when not in use.
No gunsmithing required, handguards mounts just like factory
handguards.
Rail covers included. LIFETIME WARRANTY
Item
Number
Description
Price
CA-M44MM
Command
Arms ALUMINUM Handguard Set (Carbine) 4-Sided Rail, Black
6 piece interchangeable
pistol grip for M16/AR15 and similar type firearms. Grip incorporates
multiple finger groove and palm swell inserts (3 each) allowing the user
to customize their grip to fit all hand sizes for maximum comfort and
control.
Provides increased control during firing
Finger grooves, palm swell and contoured backstrap allow and increased
powerful grip
Easily changeable front and rear rubberized grip inserts mount
securely
Mottled surface minimizes risk of slippage when wet
Easily replaces standard grip
Constructed of high density polymer
* Optional target stand (UPGS) sold separately
Triple
Picatinny Rail System for Front Sight M16/AR15/M4
Item
Number
Description
Price
CA-X3
Command Arms Triple
Picatinny Rail System for Front Sight M16/AR15/M4,
Black
$86.99
2.5"
center Picatinny rail for AR15/M16/M4
Removeable 2.5" center rail for
AR15/M16/M4. Mounts on upper or lower handguard. Excellent for mounting
lasers/flashlights/vertical grips/bipods. Rail can be used by itself or
added to TRM2 to create TRM3. Fits both, standard & thickend heat
shields.
Made from reinforced polymer.
Item
Number
Description
Price
CA-TRM
Command
Arms 2.5 inch center Picatinny rail for AR15/M16/M4,
Black
$13.00
CA-TRMG
Command
Arms 2.5 inch center Picatinny rail for AR15/M16/M4,
Green
$13.00
CA-TRMT
Command
Arms 2.5 inch center Picatinny rail for AR15/M16/M4,
Tan
$13.00
Two
45 degree Picatinny rails for AR15/M16/M4
Two 45 degree Picatinny
rails for AR15/M16/M4. Rail mounts on upper or lower handguard and
measures 2.5 inches. Excellent for mounting lasers/flashlights. Fits both,
standard & thickend heat shields
Made from reinforced polymer.
Item
Number
Description
Price
CA-TRM2
Command
Arms Two 45 degree Picatinny rails for AR15/M16/M4, Black
$15.00
CA-TRM2G
Command
Arms Two 45 degree Picatinny rails for AR15/M16/M4, Green
$15.00
CA-TRM2T
Command
Arms Two 45 degree Picatinny rails for AR15/M16/M4, Tan
$15.00
Triple
rail mount for AR15/M16/M4 handguard
Two 45 degree Picatinny
rails with removable center rail for AR15/M16/M4. Mounts on upper or lower
handguard. Excellent for mounting lasers/flashlights/vertical
grips/bipods. Fits both, standard & thickened heat shields
Made from reinforced polymer.
Item
Number
Description
Price
CA-TRM3
Command
Arms Triple rail mount for AR15/M16/M4 handguard,
Black
$22.00
CA-TRM3G
Command
Arms Triple rail mount for AR15/M16/M4 handguard,
Green
$22.00
CA-TRM3T
Command
Arms Triple rail mount for AR15/M16/M4 handguard,
Tan
$22.00
Short
Length Picatinny Rail for Standard Handguard
Transform your gun to a
weapon capable of mounting various devices with our Picatinny/Weaver Rail.
Molded from hardened polymer composite. Easy to fit. No Gunsmithing
required. Designed for standard handguard of M16/AR15, but can fit various
weapons at small modification Length: 1.75 inches/4.5cm
Item
Number
Description
Price
CA-SRB
Command Arms
Short Length Picatinny Rail for
Standard Handguard, Black
$9.99
CA-SRBG
Command Arms
Short Length Picatinny Rail for
Standard Handguard, Green
$9.99
CA-SRBT
Command Arms
Short Length Picatinny Rail for
Standard Handguard, Tan
$9.99
AR15
Front Sight Mounted Dual Rail Polymer
The TPR15P securely
mounts to the front sight providing two ails for laser and light equipment
to be mounted.
2 1/2" 4 position Picatinny rail on each side
High density polymer construction
Easy to fit/remove and secured by Allen bolts
Accepts Forward Barrel Rail (item# FL1)
An economical alternative to our TPR15X
No gun-smithing required LIFETIME WARRANTY
Item
Number
Description
Price
CA-TPR15P
Command
Arms AR15 Front Sight Mounted Dual Rail Polymer, Black
$33.00
7th
Rail for X6 & X6L & TPR15X
Item
Number
Description
Price
CA-FL1
Command
Arms 7th Rail for X6 & X6L & TPR15X, Black
$37.00
CA-FL1G
Command
Arms 7th Rail for X6 & X6L & TPR15X, Green
$37.00
CA-FL1T
Command
Arms 7th Rail for X6 & X6L & TPR15X, Tan
$37.00
Standard
Length Picatinny Rail for Thick Handguard
Transform your gun to a weapon capable
of mounting various devices with our Picatinny/Weaver Rail. Molded from
hardened polymer composite. Easy to fit. No Gunsmithing required.
Designed for thick handguard of M16/AR15, but can fit various weapons at
small modification. Length: 6 inches/15.5cm
Item
Number
Description
Price
CA-PRB
Command Arms
Standard Length Picatinny Rail
for Thick Handguard, Black
$19.99
CA-PRG
Command
Arms Standard
Length Picatinny Rail for Thick Handguard, Green
$19.99
CA-PRT
Command
Arms Standard
Length Picatinny Rail for Thick Handguard, Tan
$19.99
Flashlight/Laser
Mount-One Inch
Flashlight mount which can
be used on any Picatinny/Weaver rail. Suitable for 1" devices. Easy to
fit and dismantle. Light-weight. Molded from reinforced polymer composite.
Exceptional design detail.
Fits all Picatinny rails.
Efficient and easy to fit.
Quick release mechanism.
Designed for easy flashlight insertion and retention.
Molded from reinforced plastic composite.
Available in Desert Tan, Black, and OD Green
Item
Number
Description
Price
CA-BK2
Command Arms One
Inch Flashlight/Laser Mount, Black
$27.99
CA-BK2ODG
Command Arms One
Inch Flashlight/Laser Mount, OD Green
$27.99
CA-BK2T
Command Arms One
Inch Flashlight/Laser Mount, Tan
$27.99
M16/AR15
or Ruger Mini 14 Mag Coupler
Expands ammunition
capacity and saves reload time by joining two magazines for the M16/AR15
or the Ruger Mini 14. Coupler will not scratch of deform mags. lightweight
and fiberglass, reinforced with a lifetime warranty. Battle tested and now
being used by front line forces in several theatres of operation. LIFETIME WARRANTY
Item
Number
Description
Price
CA-M16MC
Command Arms M16/AR15
or Ruger Mini 14 Mag Coupler,
Black
$13.99
CA-M16MCODG
Command Arms M16/AR15
or Ruger Mini 14 Mag Coupler,
Green
$13.99
CA-M16MCT
Command Arms M16/AR15
or Ruger Mini 14 Mag Coupler,
Tan
$13.99
Other gun accessories too numerous to break down by manufacturer or caliber
that may be of interest...
RESTRICTED ITEMS Some
of the goods on the A 2 Z Outdoors web site may be restricted in your delivery
area by Federal, State, and/or Local law. A 2 Z Outdoors does not, and
cannot grant the right or authority to persons to purchase items which may be
regulated pursuant to such laws. You must be 21 years of age to purchase
anything from A 2 Z Outdoors and it is your responsibility to check Federal,
State, and/or Local laws to insure legal possession of such items in the
delivery area. Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot
be under a legal disability to purchase certain restricted items.
Policies: Click
here for a complete listing of our
policies including our Privacy Policy.
A2 Z Outdoors is not responsible or
liable for any omissions, errors or inaccuracies in any data or information
posted or contained on this site, including but not limited to, product prices,
features, specifications and technical data or information. In addition A2Z
Outdoors reserves the right to change without prior notice any data and
information posted or contained on this site, including but not limited to, any
product prices, features, specifications and technical data or information.
Online
orders are restricted to the USA and Canada only! We
accept American and Canadian credit cards only.