When wiring, use these heavy-duty, 10-gauge connectors where a plug and socket can’t be used.

This heavy-duty trolling motor connector uses a snap-lock design for 6- to 12-gauge wire. The kit includes two plug halves, four contacts and four solder plugs for securing wire leads into contacts (wire not included).

With rugged, durable construction, this kit fits transducers of all major manufacturers, and allows mounting on the lower unit of bow- or transom-mount trolling motors.

Take advantage of easier steering and speed control on any hand control motor. These extension handles let you fish more comfortably and attach easily to your trolling motor’s tiller handle.

These ergonomic handles fit all outboard and trolling motors. Simply twist the handle to loosen, adjust and tighten, then you’re ready to fish comfortably in any situation.

Nothing gives you a view of the bottom like Universal Sonar 2. With these cables, you can connect your Universal Sonar 2-equipped motor to your favorite brand of sonar or fishfinder (200 kHz and 200/83 kHz DualBeam PLUS™ compatible).

For Maxxum Pro, Maxxum, Riptide Pro or Riptide SM bow-mount trolling motors.

This kit attaches to the top side of the upper arm of a scissors mount. When the motor is stowed, the stabilizer is positioned vertically between the upper arm of the bracket and the deck of the boat. A rubber bumper also protects the deck finish.

For any Maxxum Pro, Maxxum, Riptide Pro or Riptide SM bow-mount trolling motor.

With a design that attaches between the upper and lower arm of the mounting bracket, this stabilizer pivots into vertical position when the motor is stowed to reduce bounce from heavy chop or wake. It then rotates into a horizontal position along the side upper arm when the motor is deployed. It’s saltwater-tested and fully corrosion-resistant.

For quick, easy removal of your motor, the extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system.

For quick, easy removal of your motor, the extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system.

For quick, easy removal of your motor, the extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system.

Easily remove your bow-mount motor with these high-yield composite brackets. They’re ultra-strong, corrosion-resistant and feature a low-profile design that leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (not included).

Easily remove your bow-mount motor with these high-yield composite brackets. They’re ultra-strong, corrosion-resistant and feature a low-profile design that leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (not included).

In addition to the speed, steering and on/off controls of the standard CoPilot™ remote, Terrova’s CoPilot lets you activate AutoPilot (on AutoPilot-equipped models) or reach maximum speed at the touch of a button. Free yourself from the pedal and fish from anywhere on the boat

For PowerDrive V2, PowerDrive and Riptide SP motors, this replacement remote gives you control of steering, speed and on/off from anywhere on the boat. Remote is completely waterproof and floats.

This replacement remote is compatible with Terrova and Riptide ST motors. It lets you control speed, steering, on/off as well as giving you the power to hit maximum speed in an instant or activate AutoPilot. Remote is completely waterproof and floats

For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design and durable, abrasion-resistant 48" nylon rope.

Control speed, steering and on/off on your PowerDrive V2 with the wireless CoPilot™ remote accessory. It installs easily with plug-n-play design and a receiver that attaches to the right side plate of the trolling motor mount. A plug is also included, allowing a corded foot pedal to be used in conjunction with CoPilot.

CoPilot for PowerDrive V2 Details

Attach the CoPilot receiver to the right side plate (2 screws), plug it into the back of the motor and CoPilot is ready to fish. A foot pedal plug on the receiver allows you to switch back and forth between CoPilot and foot pedal controls.

System is programmable to allow multiple CoPilot remotes and/or wireless foot pedals to be “learned” (up to 10 total, sold separately). System includes: receiver, key-fob remote, three quick-release rod mounts and wrist/belt strap. Features Minn Kota’s two-year warranty.

Control speed, steering and on/off on your PowerDrive motor with the wireless CoPilot™ remote accessory. It installs easily with plug-n-play design and a receiver that attaches to the right side plate of the trolling motor mount. A plug is also included, allowing a corded foot pedal to be used in conjunction with CoPilot

CoPilot for PowerDrive Details

Attach the CoPilot receiver to the right side plate (2 screws), plug it into the back of the motor and CoPilot is ready to fish. A foot pedal plug on the receiver allows you to switch back and forth between CoPilot and foot pedal controls.

System is programmable to allow multiple CoPilot remotes and/or wireless foot pedals to be “learned” (up to 10 total, sold separately). System includes: receiver, key-fob remote, three quick-release rod mounts and wrist/belt strap. Features Minn Kota’s two-year warranty.

Control speed, steering and on/off on Riptide motors with AutoPilot. The wireless CoPilot™ remote accessory installs easily with plug-n-play design and a receiver that attaches to the right side plate of the trolling motor mount. A plug is also included, allowing a corded foot pedal to be used in conjunction with CoPilot.

CoPilot for Riptide PowerDrive Details

Attach the CoPilot receiver to the right side plate (2 screws), plug it into the back of the motor and CoPilot is ready to fish. A foot pedal plug on the receiver allows you to switch back and forth between CoPilot and foot pedal controls.

System is programmable to allow multiple CoPilot remotes and/or wireless foot pedals to be “learned” (up to 10 total, sold separately). System includes: receiver, key-fob remote, three quick-release rod mounts and wrist/belt strap. Features Minn Kota’s two-year warranty.

Order a replacement wireless pedal to work in conjunction with CoPilot™ on PowerDrive and PowerDrive V2 motors

Replace your MicroTouch™ foot pedal for PowerDrive or Riptide electric steer bow-mount motors. Pressing the left or right side of the pedal steers the motor in that direction with fast, responsive performance that eliminates fatigue.

This fully waterproof circuit breaker protects the trolling motor from electrical damage. Features a 60 amp rating with manual reset, and is compatible with all 12-, 24- and 36-volt systems.

Quickly, easily remove or replace your prop with these kits, which are available in three different sizes to fit various Minn Kota prop dimensions (3/8", 1/2" and 5/16"). Each kit includes a prop nut and washer. A crescent wrench is required for installation.

This lock encloses the clamp screws of the motor to keep it secure, while eliminating the hassle of removing and reinstalling the motor. Features rattle-proof lining and reversible keys for easy insertion. It’s the only lock designed specifically to fit Minn Kota transom-mount motors (excludes Traxxis 40 and Traxxis 55).

This 100% weedless prop is designed to push weeds away and conserve battery power. Even at slow speeds, it powers through heavy vegetation or cover. Available in four sizes.

This 100% weedless prop features a unique, patented design with swept-back and flared blades that “wedge” weeds away while conserving battery power. It helps you move through heavy vegetation – even at slow speeds – and is available in two sizes.

Get the power you need to push through the thick stuff with the Power Prop. Fits 3-1/4" (MKP-2)

Monitor the voltage level and “state of charge” of any 12-volt battery with an LED display mounted on a compact frame that’s easy to store anywhere. Includes LEDs that indicate full, 2/3, 1/3 or “state of charge.”

This convenient adapter allows quick thru-hull connections to an AC extension cord – with no cutting or splicing required – using the male AC plug from any of our chargers. The watertight cover and gasket prevent corrosion on the AC plug when it isn’t in use.

Use the 15' or 6'cable when your standard charger cables don’t reach the bow, center or transom battery compartments. The cable features WAGO® Wall-Nut™ quick connectors (UL listed), and fused (30 amp) positive and negative leads.

Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand™ electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.

Each standard DeckHand model runs on a 12-volt battery (not included) and features a 2-year warranty.

Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand™ electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.

Each standard DeckHand model runs on a 12-volt battery (not included) and features a 2-year warranty.

Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand™ electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.

Each standard DeckHand model runs on a 12-volt battery (not included) and features a 2-year warranty.

For pontoons, this DeckHand™ gives you control of the winch from the helm as well as the flexibility to remove the winch from the boat to clear the deck. It runs on a 12-volt battery (not included) and carries a 2-year warranty.

A durably constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish.

A float allows the sock to be quickly released, preventing tangles when the fish is on.

Simultaneously monitor time, air and water temperature (in ºF or ºC) on the oversized backlit LCD display of this sensor. Includes a clock function that displays in 12- or 24-hour format, as well as built-in memory to store high and low temperature readings.

Keep track of water temperature (in ºF or ºC) within 10 feet of the surface with this handy submersible sensor. It also features built-in memory to store high and low temperature readings.

This convenient tool monitors changes in air pressure and indicates how those changes impact fishing conditions, all in a compact, marine-grade plastic case that fits easily in a tackle or glove compartment.