A 2 Z Outdoors
|
|
RCBS Bullet Casting Equipment
A2Z Outdoors offers a complete line of RCBS Reloading Presses and dies, Casting Furnaces, Moulds and Lube Dies, Case Preparation Equipment, Trimmers, Scales, Priming Equipment, Reloading Dies, Shell Holders, and RCBS Accessories.
Call RCBS Customer Service at 1.800.533.5000 or 1.530.533.5191 Monday through Thursday 6:30 AM - 3:00 PM PST, or you can write them at RCBS, 605 ORO DAM BLVD., OROVILLE, CA 95965.
Contact the manufacturer above for technical help, please use the BUY buttons on the web page to order the products you want from A2Z Outdoors
|
|
 |
Pro-Melt™
Furnace Here's a hot little number. Our heavy duty Pro-Melt furnace has a high temperature heating element, plus an industrial grade thermostat coupled to a remote sensor on the bottom of the pot for added accuracy and response. Range: 650 degrees to 850 degrees F. Can be set up for either left- or right-handed operation. Lead capacity is 22 pounds. 800 Watts. Pro-Melt Furnace: |
| Order Number | Description | Price | |
|
RCB81100 |
RCBS Pro Melt Casting Furnace |
$319.00 |
|
Lead
Thermometer With a 1000 degrees F Range and 1% accuracy, our lead thermometer lets you pour lead at the optimum temperature. Large numbers are printed on a 1-1/2" glass-covered face. Six-inch probe works with RCBS Pro-Melt furnace or pot. An adjustable 6" handle helps to prevent burning fingers. 81175 Lead Thermometer Lead Dipper 80015 Lead Dipper |
| Order Number | Description | Price | |
|
RCB81175 |
RCBS Lead Thermometer with Handle |
$47.00 |
|
| RCB80015 |
RCBS Lead Dipper |
$21.00 |
|
Lead
Pot This heavy-duty cast-iron pot holds up to 10 pounds of molten metal. It features a flat bottom for stability, bail handle, pouring spout, and a tab lifter for gripping with insulated tongs or pliers. 80010 Lead Pot Ingot Mould 80005 Ingot Mould |
| Order Number | Description | Price | |
|
RCB80010 |
RCBS Lead Pot |
$19.00 |
|
| RCB80005 |
RCBS Lead Ingot Mould |
$19.00 |
|
Lube-A-Matic-2
Bullet Sizer/Lubricator Size and lubricate cast bullets in one step with the Lube-A-Matic-2. Just insert a bullet in the sizer die and pull the handle. A sized and lubricated bullet ejects on the upstroke. A fingertip regulator lets you fine-tune lubricant flow. Lube-A-Matic-2 also seats gas checks. A high-quality tool that's a must-have item for the serious bullet caster. 80040 Lube-A-Matic-2 Die and top punch sold separately. Click here for charts showing Lube Dies and Top Punches |
| Order Number | Description | Price | |
|
RCB80040 |
RCBS Lube-A-Matic-2 |
$169.00 |
|
| RCB86880 |
RCBS Lube-A-Matic-2 Dust Cover |
$12.00 |
|
Bullet Lubricant
|
| Order Number | Description | Price | |
|
RCB80008 |
RCBS Bullet Lubricant |
$7.00 |
|
| RCB80009 |
RCBS Rifle Bullet Lubricant |
$7.00 |
 |
Neck
Expander Dies for Cast Rifle Bullets Strongly recommended when reloading cast rifle bullets in bottleneck cases. In one step, a neck expander die expands the case neck and slightly flares the mouth -- critical for accurately seating bullets without shaving lead and bullet weight from their sides. 39800 Neck Expander Body |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Text and images courtesy of RCBS
