A 2 Z Outdoors
|
|
RCBS Group B Dies
A2Z Outdoors offers a complete line of RCBS Reloading Presses and dies, Casting Furnaces, Moulds and Lube Dies, Case Preparation Equipment, Trimmers, Scales, Priming Equipment, Reloading Dies, Shell Holders, and RCBS Accessories.
Call RCBS Customer Service at 1.800.533.5000 or 1.530.533.5191 Monday through Thursday 6:30 AM - 3:00 PM PST, or you can write them at RCBS, 605 ORO DAM BLVD., OROVILLE, CA 95965.
Contact the manufacturer above for technical help, please use the BUY buttons on the web page to order the products you want from A2Z Outdoors
|
|
RCBS Group B Dies -Three Die Sets
Did you ever wonder what the difference between Group A, B, C, D, E, F, and G RCBS dies was. RCBS tells us that the only difference is price due to the popularity of the die leading to mass production runs of the most popular dies and thus reducing the price to the consumer of the most popular dies. All the materials and workmanship is the same and all tolerances are held to the same high standards of the RCBS name for all groups of dies.
 |
Carbide
Pistol Dies Our carbide dies eliminate an entire step in the reloading process: lubricating cases. The diamond-lapped tungsten-carbide inner ring is so smooth that cases simply can't stick or get scratched. These are top-of-the-line dies, built for a lifetime of flawless performance.
|
Group
B Dies Item
Prices shown in yellow above columns
| Price | $45 | $45 | $35 | $35 | $35 | $30 | ||||||
| Caliber | Carbide Set Roll Crimp |
Carbide Set Taper Crimp |
Set Roll Crimp |
Set Taper Crimp |
Sizer Die |
Die |
||||||
| 32 Automatic (RN)1 |
|
|||||||||||
| 357 Magnum/38 Special/.357 Rem Maxi (RN-WC) | ||||||||||||
| 9mm Luger /9x21mm / 9x23 Win/356 TSW | ||||||||||||
| 9 x 23mm Winchester | ||||||||||||
| 380 Automatic Pistol (RN) | ||||||||||||
| 40 S&W/10mm Auto (SWC) | ||||||||||||
| 41 Magnum (RN-SWC) | ||||||||||||
| 44 Magnum/44 Special (RN-SWC) | ||||||||||||
| 44-40 Winchester (44 Win) (RN)3 | ||||||||||||
| 44-40 Winchester (RN) Jacketed4 | ||||||||||||
| 45 Automatic (45 ACP) (RN-SWC) | ||||||||||||
| 45 Colt (RN-SWC) | ||||||||||||
| 454 Casull (SWC) | ||||||||||||
| 480 Ruger / 475 Linebaugh | ||||||||||||
| 50 Action Express (SWC) | ||||||||||||
| 500 S&W |
RCB23812
|
---
|
RCB23808
|
---
|
RCB23837
|
RCB23832
|
Group B Dies Item Prices shown in yellow above columns
| Price | $15 | $20 | $20 | $7 | $33 | |||||
| Caliber | Die |
Crimp Seater Die |
Crimp Seater Die |
Unit |
Die |
|||||
| 32 Automatic (RN)1 | NA | |||||||||
| 357 Magnum/38 Special/.357 Rem Maxi (RN-WC) | Order Above | |||||||||
| 9mm Luger /9x21mm (RN-TMJ) | Order Above | NA | ||||||||
| 9 x 23mm Winchester | Order Above | NA | ||||||||
| 380 Automatic Pistol (RN) | Order Above | NA | ||||||||
| 40 S&W/10mm Auto (SWC) | Order Above | NA | ||||||||
| 41 Magnum (RN-SWC) | Order Above | NA | ||||||||
| 44 Magnum/44 Special (RN-SWC) | Order Above | NA | ||||||||
| 44-40 Winchester (44 Win) (RN) | Order Above | NA | ||||||||
| 44-40 Winchester (RN) Jacketed | Order Above | NA | ||||||||
| 45 Automatic (45 ACP) (RN-SWC) | Order Above | |||||||||
| 45 Colt (RN-SWC) | Order Above | NA | ||||||||
| 454 Casull (SWC) | Order Above | NA | ||||||||
| 480 Ruger / 475 Linebaugh | Order Above | NA | ||||||||
| 50 Action Express (SWC) | Order Above | NA | ||||||||
| 500 S&W | Order Above |
1 For use with .311" bullets. 2 For use with .314" bullets *Price may vary. May not be available from stock. 3 Regular Seater Die for all lead and jacketed bullets from Hornady, Sierro, and Speer. 4 Jacketed Seater Die for Remington bullets only.
|
Trim
Dies Doubles as a visual case length gauge. Run a case into the Trim Die and if the case sticks out above the top of the die, it's too long. File the case down until it's flush with the top of the die. Then deburr the case mouth with a Deburring Tool. Precision machined Sizer Die chamber with slightly larger neck to ensure accuracy in gauging case lengths. Head space is held to minimum tolerances to avoid changing the length of the case. Trim Die is case hardened and hand polished. Heat treated to withstand a file bearing against the top surface without damage to the die. Cases with an overall length of 1.700" and shorter requires the use of an Extended Shell Holder. Standard 7/8" - 14 thread. Packed in a convenient plastic storage box. Purchase from chart above |
Test and images courtesy of RCBS
