Model 2400 features:

• New micrometer…easy adjustments of .001".
• Cast iron frame to maintain precision alignment.
• New push button collet chuck is ideally suited for use with optional power adapter.
• Handles 3-1/4" case length.
• Universal collet fits all popular cases – no others to buy.
• TiN (Titanium Nitride) coated replaceable cutter.
• Storage holes for pilots.

Model 1400-XT features:

• Cast iron frame to last a lifetime.
• Universal collet fits all popular cases – no others to buy.
• Handles 3" case length with ease.
• New replaceable cutter with TiN (Titanium Nitride) surface treatment.
• Coarse and fine adjustments for case length.
• Storage holes for pilots.

New replaceable (TiN) Titanium Nitride Coated high speed cutters.

Optional Power Adapter with 1/4” hex for use with cordless screwdrivers.

Possibly one of the most important tools you will ever use!

A quick and easy way to sort cases by neck wall thickness and uniformity. This tool allows you to accurately measure the neck wall thickness of the cartridge case and determine its uniformity.

Two mandrel sizes are supplied to allow measurement of all cases from .17 cal. to .338 cal. including cases with small (.060) flash holes. For your convenience the mounting base allows direct attachment to your reloading bench.

Pilot stops are required for each caliber (see chart below). Two pilot stops are supplied with the tool, #06121,
.22 cal. and #06130, .30 cal.

During the manufacturing process, burrs that can cause erratic ignition are often left inside the case at the flash hole.

Redding now manufactures two different tools for removal of flash hole burrs. Both tools use pilot stops listed below.

The universal tool is for all calibers from .22 thru .338 cal. using standard (.080”) flash holes. This tool controls the cutting depth with a built-in stop that locates on the inside web of the case. A unique feature of this tool is the cross drilled hole for chip relief. Uses standard pilot stops for 3/16” mandrels.

The small tool is for .17 & .20 cal. and cases with small (.060”) flash holes. This tool does not control the cutting depth. The operator must control the cutting depth using the small pilot stops for 9/64” mandrels.

Redding Primer Pocket Uniformers are precision ground carbide tools designed to cut primer pockets to a uniform depth and square to the case head.

The depth of cut is to SAAMI specifications and is controlled by a shoulder ground into the cutter that cannot change.

The original non-liquid sizing die lube is now available from Redding. True to the original LeClear product of the 70’s – green in color. Packaged in 1 oz. tins

 The most popular way to properly lubricate cases for resizing and case forming. The bottom side of the pad includes non-skid feet so it won’t skate all over your bench when you are using it. Kit includes 2 oz. plastic bottle of Redding Case Lube

Removes burrs and bevels case mouths for easy bullet seating. Hardened precision ground flutes make clean, easy, chatter-free cuts. Accepts all cases from .17 to .45 caliber.